Looking for an easier way to dry oil & Biodiesel out faster? Want to speed up your operation? Then you'll love our drying tank kit! It'll help speed up drying tremendously!
Instead of taking days or weeks waiting for the water to settle out of your oil or Biodiesel or bubbling for days on end, you can now speed the process up by using a time proven method for fast drying! It's called heat & circulation and it can dry your oil & Biodiesel free of moisture much, much faster than settling or bubbling!
While we've seen several heat & circulate systems out there, the spray pattern from our
Dry Pro nozzle is flat out amazing! Instead of creating a mist out of the oil (which would end up everywhere but in the drum), our Dry Pro nozzle generates a fine film of heated oil that sprays across the whole drum.
The large surface area generated by the spray pattern from the nozzle allows the water to quickly evaporate leaving the oil nice and dry. This unique spray pattern allows you to get the maximum surface area for water to evaporate out of while keeping the oil where it belongs; in the drum!
Add a simple household fan blowing across the top of the drum and the water will evaporate even faster! This is because the air flowing across the top of the drum literally sucks the evaporated water vapor out of the drum and wisks it away.
The nozzle has been so effective at drying oil that it was even featured in a Waste Oil & Filtration workshop at the 2008 Collective Biodiesel Conference! Brad Crafton from the Mississippi Mineral Research Institute praised it for how well it dewatered waste vegetable oil in preparing the oil for use for Biodiesel production!
We've even had people that were so amazed at how fast and how well it dried the oil that they called us back the same day they installed it to tell us how great of a spray nozzle it was. We couldn't agree more!
Waste Vegetable Oil: - No higher than 3,000 PPM (0.3%)
Biodiesel: - No higher than 500 PPM (0.05%) (ASTM D2709)
While we've sold the Dry Pro nozzle for several years, we're now pleased to offer a complete kit for building your very own drying tank from a 55 gallon steel drum! The kit includes all of the plumbing required to build the circulating system including a transfer pump, black steel pipe, ball valves, the Dry Pro nozzle, a heavy duty 1200 watt band heater, and some tubing and quick connect fittings to empty the drum using the same pump once your oil is dry!
In just a couple of hours, you can have a ready to use dewatering tank to get your oil or Biodiesel as dry as possible in record time!
Click Here to see the complete assembly instructions.
We also include a printed copy of the assembly instructions with each kit.an easy to follow set of instructions and a diagram to get you up & dewatering fast!
Instructions For Using The Tank:
Complete Drying Tank Kit Includes:
(1) Roll Yellow Teflon Tape
(1) Dry Pro Nozzle
(1) 1200 Watt Heavy Duty Band Heater
(1) 1" Heavy Duty Transfer Pump
(1) 3/4" Ball Valve
(1) 5 Feet 3/4" Clear Tubing
(2) 1" x 12" Long Black Steel Pipes
(1) 1" Black Steel Union
(1) 1" 90° Black Steel Elbow (2) 1/2" to 1 1/4" Hose Clamps
(1) 3/4" 90° Black Steel Street Elbow (1) 1" x 3/4" x 3/4" Black Steel Tee
(1) 3/4" Black Steel Close Connector
(2) 1" Black Steel Close Connectors
(1) 3/4" Quick Connect Female Coupler (Part B)
(2) 3/4" Quick Connect Hose Barbs (Part E)
(2) 3/4" Quick Connect Dust Caps (Part DC)