This handy 1000 Watt heater is great for heating up waste vegetable oil! Its incredibly handy when you're getting ready
to filter oil in preparation for processing, heating a biodiesel wash tank, or just keeping liquids warm.
Add an inverter and it can even be used to melt oil into liquid when collecting on site.
The heater is 17" tall and features a 7.5" x 3" protective shroud mounted around a 1000 watt heavy duty heating element.
It comes with a 6 foot grouned cord and is thermostatically controlled.
This heater is great when settling water out of oil as it can heat a 5 gallon bucket of oil past 150° F and on up
toward boiling depending on the volume of oil and the container's insulation. It's a bit too big to fit into the bung on 55 gallon barrels.
Heats one gallon of water from 60° F to 130° F in approximately 10 minutes.
Check out our product overview video
The manufacturer warrants the heater for use only in water. They'll work in oil, but aren't warranted for that purpose.
Before using in oil, ensure it properly works in water first.
For longer heater life, don't suspend the heater by it's cord.
Instead, suspend it by it's metal protective shroud with a metal wire.
Ships from Chandler, Arizona within 1-2 business days.
FOR METAL CONTAINERS ONLY! NOT FOR USE IN LARGE POLY TANKS!
NOTE: Be sure to clean the element after each use to reduce
food build up which may cause the element to smoke when in use.
- 120 Volt 1000 Watt Element
- Designed For Continuous Heating
- Heats WVO/SVO Up Extremely Quickly
- Stainless Steel Guard
- Handy 6 Foot Cord
- Dimensions: 17" Length x 3" Wide
- Shield Dimensions: 7.5" Length x 3" Diameter