Description:
We've teamed up with WVO Designs
to bring you this incredible gear driven wvo oil transfer pump! Designed with hard core oil pumping in
mind, it's ready to handle pretty much anything you can throw at it.
The waste veggie oil (wvo) transfer pump is named the Raw Power Monster Gear Pump and after looking at one for ourselves and seeing
how well it pumps, we thoroughly understand why. This beast features a 3/4 HP
motor attached to a heavy duty massive gear driven pump head that can move waste vegetable oil
extremely fast!
The Monstrous Pump Motor
The motor that drives the pump is a massive 115 Volt 60 Hertz motor that's rated at 3/4 Horse Power.
A standard 3 prong plug is pre-wired to a switch to make using the pump extra easy.
Motor Specifications
The USA made motor is an industrial design custom made just for the Raw Power Monster Pump!
It delivers 3450 RPM's to the Monster Gear Pump head, is thermally protected, and runs off of
standard single phase 115 volts. Under a full load it only pulls 9.6 amps, so a standard 10 amp
residential power outless can power this beast with ease.
We offer a complete hose kit that includes 33' of hose plus all the clamps and fittings
necessary to build a hose setup just like in the video above!
Simply cut the hose into the desired lengths, attach the fittings and clamps, and your hose is ready to go!
25 GPM Hose Kit Includes:
33 Feet 1.25" (31.75 mm) PVC Hose
(3) 1.25" Male Camlock E Couplings
(3) 1.25" Female Camlock C Couplings
(1) 1.25" Camlock Dust Plug
(1) 1.25" Camlock Dust Cap
(8) Stanless Steel Band Clamps
15 & 10 GPM Hose Kit Includes:
33 Feet 1" (25.4 mm) PVC Hose
(3) 1" Male Camlock E Couplings
(3) 1" Female Camlock C Couplings
(1) 1" Camlock Dust Plug
(1) 1" Camlock Dust Cap
(8) Stanless Steel Band Clamps
Reversible Electric Motors
The electric motors that ship with the pump heads can spin both ways. It requires some rewiring of the motors,
an extra switch, and some drilling on the motor switch housing, but can be done. Click Here to download the wiring instructionsGas Powered Options
Want to run a Monster Gear Pump with a gas engine instead of an electric motor? Then check out our Gas Engine Motor Mount Kit!
They bolt right up to a Harbor Freight Predator 99 CC motor
and give you the option to pump without electricity!
Monster Pump Specifications:
Heavy Duty Electric Motors
Commercial Duty Power Switch With 2.5 Foot Power Cord
25 GPM Motor - 3/4 HP - 9.5 Amps - 1100 Watts
15 GPM Motor - 3/4 HP - 9.5 Amps - 1100 Watts
10 GPM Motor - 3/4 HP - 9.5 Amps - 1100 Watts
Shaft Size: 16 mm
Shaft Woodruff Key: 5 mm width x 5 mm deep x 16 mm length
Thermal Overload Protection
115 Volts - 60 Hertz
230 Volt - 50 Hertz Available Upon Request (no cord or plug included)
SEE OUR NEWSLETTERS
CHECK OUT OUR BLOG
SHARE YOUR PICTURES
FIND US ON FACEBOOK
VISIT US ON YOU TUBE
