Introducing The Mini-Scan Rapid Biodiesel Testing Anazlyer Measures Total Glycerin, Free Fatty Acid, and Acid Number
This incredible testing system allows for quick, easy, and accurate testing of key measures important
to the Biodiesel production process. Within minutes you can get accurate readings on such things as
free fatty acid levels (FFA's) in biodiesel feedstocks and in completed biodiesel. This is incredibly
helpful in identifying just how much catalyst should be used to produce high-quality Biodiesel.
Once the Biodiesel is produced, this great testing system can then help you accurately measure total
glycerin levels in Biodiesel. Instead of having to use a Gas Chromatograph system, you can now
easily and accurately get a reading on conversion rates in your Biodiesel which are important for
meeting the ASTM D 6751 specifications for Biodiesel.
Using The Mini-Scan Testing System
The Bonanza Labs Mini-Scan Analyzer was designed with ease of use in mind. To analyze a sample,
you simply prepare the samples, place them into the analyzer, and read the results!
With the included flash drive you can also transfer the results to a computer for further analysis.
Just pop the flash drive into the mini-scan, test your sample, and the results are transferred
directly to the flash drive for future review!
Advantages Of Using The Mini-Scan Testing System
It Correlates Tightly To ASTM Methods.
It's been tested against the ASTM Standard Test methods for FFA (ASTM D684), Acid Number (ASTM D664), and Total Glycerin (ASTM D6584)
and has demonstrated excellent correlation results!
It Has A Wide Testing Range And Is Very Precise
Total Glycerin (TG) Range: 0.60% to 0.02%
Free Fatty Acid Percentage (FFA%) Range: 25.0% to 0.2%
Acid Number (AN) Range: 8.0 to 0.2 units
It's Portable!
Unlike a Gas Chromatograph or other large lab equipment, the Mini-Scan extremely portable! Powered by a rechargable
battery, it can easily be transported to where it's needed! This means samples can be tested on site instead of having
to haul them back to a lab. Just grab the mini-scan, prep your samples, and let the testing begin!
To make it easy to transport the Mini-Scan, Bonanza Labs includes a handy carrying case with protective foam inserts
that allow you to bring everything needed for testing on-site in one convenient package!
Pre-packaged Testing Chemicals Acid Number, Total Glycerin, And Free Fatty Acid Test Kits
Tired of mixing chemicals for testing? Then you'll LOVE the Mini-Scan testing system! Instead of having to
ensure you get just the right amount of testing solution in a vial, the Mini-Scan comes with ready-to-use vials
that have been pre-measured out! All you do is add your sample, add the reagent, mix, and test! Even the dosing
pipettes & pipette tips are easy to use!
Easy To Calibrate Free Fatty Acid Calibration
If you've ever calibrated lab equipment, you know what kind of a chore it can be.
That's not the case with the Mini-Scan Testing System! Just prep the included calibrator vials,
start the calibration, insert and remove the calibrator vials, and the calibration is complete!
With calibration only required about every 30 days, the Mini-Scan Analyzer is always ready to test!
Get Results Extremely Fast! Free Fatty Acid Testing
Ever been forced to wait for a lab to send you results? Then you'll LOVE the Mini-Scan! The Free Fatty Acid
and Acid Number test are nearly immediate! Just prep the sample, analyze the samples, and the results are ready!
For the Total Glycerin test, a simple 10 minute incubation is performed on the samples and then, like the other
Mini-Scan tests, simply analyze the samples and the results are ready! It doesn't get much simpler than that!
Save Test Results Electronically
Now you can save your test results electronically! The Mini-Scan will export the results of your tests to it's
included 2 GB USB Drive. Data files are created in a standardized .CSV (comma-separated values)
format that can be read by spreadsheet programs such as Microsoft Excel and iWork Numbers.
Files are PC & Mac compatible and include all the data the Mini-Scan captures from each test.
The Mini-Scan creates a separate file for each day run and for each type of tests. It can even
capture multiple tests in a single file!
Need to run multiple samples at once? No problem! Just prep multiple vials for testing and let the Mini-Scan
go to work! As fast as you can load the samples into the Mini-Scan, you can get the results back! One right after
the other!
See The Mini-Scan In Action!
Watch the video below to see how easy the Mini-Scan Analyzer is to use!
Watch our other Mini-Scan video to learn how to use the Mini-Scan from start to finish!
How The Mini-Scan Testing System Works
The Mini-scan uses UV/VIS Spectroscopy coupled with chemical and biochemical Detection Analysis to measure
Free Fatty Acid (FFA), Acid Number (AN), and Total Glycerin (TG) levels in oil & Biodiesel samples.
Total Glycerin Test
Total Glycerin is determined using an enzymatic reagent which digests residual glycerin and then
quanitates the break down product using a chromogenic reaction which is read spectrophotometrically.
Free Fatty Acid Test & Acid Number Test
Free Fatty Acid (FFA) or Acid Value (AN) is determined spectrophotometrically with a chromogen reagent
interacting with the FFA and changing its visible spectrum. This change is measured and the FFA or AN determined.
Advantages Of The Mini-Scan Rapid Analyzer System
Rapid and Easy-to-use On Site for Process Control & Monitoring Incoming Feedstocks
Single, Low Cost Platform
Three Tests Available (Free Fatty Acid, Acid Number, & Total Glycerin)
Repeatable Quantitative Methods
Less Expensive Than Gas Chromatography
Improved Employee Safety
Reduced Toxicity & Disposal
Cost Effective
Incoming Feedstock Testing
Measure Free Fatty Acid Levels
Qualify Feedstock Sources or Suppliers
Blend Feedstocks To Achieve Acceptable FFA Levels
Biodiesel Processing Testing
Monitor Total Glycerin During Processing
Allows You To Adjust Your Process To Achieve Desired Results
Finished Product Measurement
Optimize Quality of Finished Biodiesel
Measurement Of Final Product Quality
Ability To Test Multiple Batches Quickly
Learn How To Use A Mini-Scan!
Check out how easy the Mini-Scan is to use in this great video!
We demonstrate how to set a Mini-Scan Analyzer up, how to calibrate it,
and then test Biodiesel and vegetable oils.
You'll love how simple it is to use!
Simply click the video below to get started!
The Mini-Scan Analyzer Test Kits Everything needed to test in convenient, ready to use kits!
Free Fatty Acid & Acid Number Testing
Free Fatty Acid (FFA) or Acid Value (AN) is determined spectrophotometrically with a chromogen reagent
interacting with the FFA and changing its visible spectrum. This change is measured and the FFA or AN determined.
This is a primary method calibrated with known amounts of FFA.
The Limit Of Detection (LOD) is 0.1%.
Free Fatty Acid Testing Prepare The Vials, Insert The Samples, Results Are Ready!
Acid Number Testing Prepare The Vials, Insert The Samples, Results Are Ready!
Total Glycerin Testing
Total Glycerin (TG) is determined using an enzymatic reagent which digests residual glycerin
and then quanitates the break down product using a chromogenic reaction which is read spectrophotometrically.
The Limit Of Detection (LOD) is 0.005%.
Total Glycerin Testing Prepare The Vials, Incubate Samples, Insert The Samples, Results Are Ready!
Acid Number Test Kit
Testing Range: 0.2 - 8.0
Repeatability: +/- 0.1
Correlation to Standard (ASTM D664): 0.97
Shelf Life: 1 Year Kit Contents:
- 10 sampling tubes
- 3 dilution / "blank" tubes
- 2 sets calibration tubes
- 1 bottle detection testing reagent
Total Glycerin Test Kit
Testing Range: 0.02% - 0.60%
Repeatability: +/- 0.005%
Correlation to Standard (ASTM D6584): 0.99
Shelf Life (Refrigerated @ 40° F): 1 Year
Shelf Life (Unrefrigerated): 60 days Kit Contents:
- 10 sampling tubes
- 10 dilution / "blank" tubes
- 2 sets of 3 calibration tubes
- 3 calibrator bottles
ADDITIONAL RESOURCES: Mini-Scan Scientific Analysis Read more about the
Mini-Scan Biodiesel Analyzer including the scientific analysis that was performed showing the tight
correlation to the ASTM Test Methods for Free Fatty Acid, Acid Number, and Total Glycerin. Acid Number Testing Users manual
on performing Acid Number testing with the Mini-Scan Free Fatty Acid Testing Users manual
on performing Free Fatty Acid testing with the Mini-Scan Total Glycerin Testing Users manual
on performing Total Glycerin testing with the Mini-Scan MINI-SCAN SYSTEM PRICING & OPTIONS:
Complete Mini-Scan Analyzer Testing System Startup Kit
This is the complete startup kit with everything you'll need to start testing right out of the box.
It includes a single test for Total Glycerin, Free Fatty Acid, and Acid Number to help you identify
which test kit you'd like.
PRICE: $5995.00 USD (Shipping Extra) Contact Us for a shipping quote.
Ships direct from manufacturer
Mini-Scan Acid Number Starter Kit (10 Complete Tests)
Mini-Scan Users Manual
Training & Tech Support From Bonanza Labs
Mini-Scan Total Glycerin Kit
This kit includes 10 complete tests for performing total glycerin testing. It also includes
2 sets of calibrators to calibrate the Mini-Scan Analyzer. For best shelf-life, keep kit refrigerated at 40° F.
PRICE: $125.00 USD (Shipping Extra) Contact Us for a shipping quote.
Ships direct from manufacturer.
Kit Includes
10 Total Glycerin Test Tubes
10 Dilution / "Blank" Tubes
2 Sets Of 3 Calibration Tubes
3 Calibrator Bottles
Foam Vial Holder
Mini-Scan Free Fatty Acid Kit
This kit includes 10 complete tests for performing Free Fatty Acid testing with the Mini-Scan Testing Analyzer.
It also includes 2 sets of calibrators to calibrate with as well.
PRICE: $75.00 USD (Shipping Extra) Contact Us for a shipping quote.
Ships direct from manufacturer.
Kit Includes
10 Free Fattty Acid Test Tubes
6 Dilution / "Blank" Tubes
2 Sets Of Calibration Tubes
1 Bottle Detection Testing Reagent
Foam Tube Holder
Mini-Scan Acid Number Kit
This kit includes 10 complete tests for performing Acid Number testing with the Mini-Scan Testing Analyzer.
2 sets of calibrators are included as well.
PRICE: $75.00 USD (Shipping Extra) Contact Us for a shipping quote.
Ships direct from manufacturer.
SEE OUR NEWSLETTERS
CHECK OUT OUR BLOG
SHARE YOUR PICTURES
FIND US ON FACEBOOK
VISIT US ON YOU TUBE
