Description:
This stainless steel suction filter is perfect for filtering liquids right at the source! Attach it to the end of your suction wand or hose, stick it into the container, kick on the pump, and filter away!

It features a 1" NPT opening, is 3" in diameter and 5.25" tall. The 600 micron pleated stainless steel filter is mounted to a perforated metal sheet and then secured to a heavy duty set of plated steel end caps.

The heavy duty pleated stainless steel mesh offers three times the surface area of a non-pleated filter giving it a much higher flow rate over a standard filter of the same size. It's rated to handle up to 10 gallons per minute and can be easily cleaned and put right back into service.

With it's small compact size it also makes it easy to transport right to a collection site. And, because it's made from stainless mesh, cleaning is a breeze! Just hose it off & you're back to work!

Description:
This suction filter is slightly different in that the suction strainer is a perforated metal made from stainless steel. It doesn't carry a micron rating, but instead features 1/16" holes that let the oil freely flow into it.

It's rated at 10 GPM and is exactly the same size as above; 3" diameter by 5.25" tall. If you're looking for a suction filter to simply keep large particles out and will be filtering later, this is a great option!

• 1/16" Perforated Steel Filter Area
• 10 GPM Flow Rate
• Plated Steel End Caps
• 1" NPT Attachment Fitting
• 5.75" Tall x 3" Diameter
• Easily Cleanable

Description:
This suction filter is great when you need higher flow rates. Rated at 25 GPM and featuring a 600 micron stainless pleated mesh, it's ready to haul! Just like our 10 GPM model, this filter features a 1" NPT opening, is 3" in diameter, but is 7" tall giving it the faster flow rate.

Also, like our 10 GPM model, the 600 micron pleated stainless steel filter is mounted to a perforated metal sheet and then secured to a heavy duty set of plated steel end caps.

50 GPM 149 Micron Suction/Pump Filter

Description:
Step it up a notch with this awesome suction filter and suction sleeve! It has a massive flow rating of up to 50 gallons per minute and, like above, can be attached to a suction hose or suction wand.

What makes it really cool though is the sweet suction shroud fitting that allows the filter to suck oil clear down to within an inch of the bottom of a container while still being able to use the whole surface area of the filter to draw in the liquid!

The filter itself is just over 8" tall and 3" wide and features a huge 2" NPT female threaded opening. It can also be threaded into a 3" wide pipe as well!

As with the filter above, this monster suction filter features heavy duty pleated stainless steel mesh giving it three times the surface area of a non-pleated filter. The stainless mesh is mounted to a perforated metal sheet and capped with heavy duty plated steel end caps.

It's also extremely easy to clean! Just hose it off to wash the grime away and it's ready to go again!

Description:
This suction filter is the perfect filter to use when you need to remove and filter as much liquid as possible from close topped drums that only have standard bungs as openings. It's specifically designed to fit right through a standard 2" barrel bung and easily connects to a suction hose or suction wand.

The filter is made from 1/4" perforated metal attached to two heavy duty plated steel end caps. It features a 3/4" NPT opening, is 2" in diameter and stands 6.25" tall. We also offer it with a really cool black steel suction pipe mounted right down the center that sits 1" from the bottom of the filter. This allows you to drain a barrel clear down to within 1" of the bottom while still being able to utilize the filtering material.

Description:
Like the filter above, this filter is awesome for sucking oil through standard bungs found on closed top barrels or other containers! It features the same heavy duty 1/4" perforated metal like above, except in this case we wrap it with a 600 micron stainless steel screen! It's the best of both worlds! Having a bung filter but still being able to filter at a reasonable micron rating right through a drum bung!

It's built exactly like the filter above which means it stands 6.25" tall, has a 3/4" NPT opening, and is 2" in diameter which allows it to fit through standard bungs. It also features a suction pipe that sits 1" from the bottom which allows you to drain a barrel down to within 1" of the bottom.

Description:
Need a bung filter with a small micron rating? Then check this one out! Like above, it fits perfectly through standard 2" barrel bungs, uses the same 3/4" NPT connection, and is the same height. What makes this filter special though is that we've added a 149 micron pleated stainless steel filter material on top of the 1/4" perforated metal sheet. This filter is ideal for filtering liquids such as used motor oil or used hydraulic fluid where fine filtering is desired.

To allow the best flow rate possible, we've removed the center suction pipe. This allows you to take full advantage of 100% of the 149 micron pleated screen while keeping the pump running as fast as possible. This also helps you keep the gunk in the bottom of the drum there as the filter will quit pulling liquid when the liquid level reaches just below the top of the filter.