Made From Heavy Duty Stainless Steel Mesh - Nesting Filter Baskets
These are the coolest drum filters we've ever seen! Made with 304 stainless steel filter mesh welded to an all metal frame,
these filters are ready for heavy duty filtering. If you've ever needed to filter heated oil, now you have a solution!
Being made from 304 grade stainless steel means they'll withstand pretty much anything you can throw at them.
Waste vegetable oil, motor oil, hydraulic fluid, transmission fluid, biodiesel, glycerin, diesel fuel, gasoline,
solvents, even water and paint can easily be filtered with these great filters!.
Stainless Mesh On The Sides Means Faster Filtering
Looking to save time filtering? One of the neat features of these filters is that the stainless steel mesh is also mounted on the side.
This means that not only can you filter through the base but also through the sides too! With traditional drum filters once the bottom is
plugged up, the liquid stops.
But with these incredible filters, the liquid keeps right on filtering out the sides meaning
they filter faster.
Also, because the filter mesh is welded to an all metal frame, it can hold up to the nastiest, scummiest liquid
you can throw at it without breaking apart.
See The Filters In Action Below!
Stackable Baskets For Staged Filtering
Another great feature is that the 1000, 800, 600, 500, 400, 300, & 234 micron filter will fit inside the 177, 149, 120, 100, 74 Micron & 1/8", 1/4" mesh filters making it easy to stage filter!
The 1000, 800, 600, 500, 400, 300, or 234 micron filters can get all the big chunks out and then the 177, 149, 120, 100 or 74 micron filters can pull out the smaller particles. It makes
filtering nasty oil down to 177 to 74 microns much easier!
Heavy Duty Construction
One of our biggest goals when making these filters was to make them durable! We wanted a strong filter basket and strong filter media.
To test our prototype we added 36 lbs of weight. No problem! Didn't even flinch! Then we added one of our boxed processor pumps
Didn't bother it at all. With over 50 lbs of weight sitting on the filter, it still held strong, held it's form, and could easily hold even more weight.
Yep! They're definitely tough filters!
Heavy Duty Filter Supports
We pulled out all the stops with these filters by adding four heavy duty steel supports to keep the filter supported
in the top of the drum. The supports are oversized and stick out past the edge of the drum making filter removal extremely
easy! Just grab a filter support & pull up.
Unlike poly filters, these filters can handle extremely hot liquids! As we all know, the hotter you can get the oil, the
easier and faster it will filter. With traditional poly filters, get much over 160 deg. F
and you may end up melting them. However, these stainless steel filters can easily take the heat--THEY'RE METAL!!!
Yes. That means you can actually filter oil right out of the deep fryers! So go ahead, heat that oil as hot as you
can get it and pour it through the filter. It's ready for it!
Quick Clean Up For Faster Turnaround
Got some really nasty oil to filter? These filters practically dare you to use them! Once you're done filtering, clean up
is a cinch! Just spray them off with hot water and they're ready for more action! Heck, you can even
throw them in a dishwasher or spray them off with a power sprayer and they're as good as new!
Available In Single & Combo Packs
These filters are available in 1000, 800, 600, 500, 400, 300, 234, 177, 149, 120, 100, 74 micron and 1/8" or 1/4" mesh, or in combination packs!
From the moment you pull them out of the box and begin to use them, you'll see the difference! Pick a set up today!
SHIPPING NOTE: WE CANNOT SHIP THESE TO A PO BOX. PLEASE SUPPLY A PHYSICAL ADDRESS
These filters ship from Michigan via FedEx Ground. Due to the large size of these filters, we can only ship them to US destinations.
Shipping outside of the lower 48 States will be more than specified on this page. Contact us for a shipping quote.