Fill-Rite 12/24 Volt Oil Transfer Pump
Front View | Pump Head | Whole Kit
Description:
We've searched high & low for a high quality powered collection pump.
We've ordered several for testing and quickly burned them up (and we tried A LOT of them!).
From the moment we took this one out of the box, we knew it was different.
To start with, it's made by Fill-Rite, the industry leader in 12 volt transfer pumps.
We could tell why they're the industry leader really quick.
The motor is much bigger than any of the pumps we've found and it even came with all the
extras that you usually have to buy extra. In testing it pumped really well.
We are extremely impressed with this pump and are sure you will be too.
Click here for several more pictures of the pump (including pump & motor internals)
The pump features dual voltage capability
(12 or 24 volts), pumps up to 7 GPM on 12 volts and up to 10 GPM on 24 volts. It's self
priming, has an integral bypass valve, comes with a 13 foot hose, a nice mesh filter, a filler
handle, and cables to hook it up with. It also carries the Fill-Rite name, which means it's
a great, high quality product. Get one of these today & you'll be set!
Additional Accessories
Northern Tool sells a 100 mesh (149 micron) suction strainer that will fit perfectly on the end of the hose of this pump.
It has more surface area and will allow the pump to handle thicker oil.
Click here to view the strainer
You can attach it with a 3/4" Barb X 3/4" Threaded fitting.
Our customers have raved about how well it works.
Features
- Brand: Fill Rite
- Pump Type: Sturdy, Cast Iron Eccentric
- Duty Cycle: 30 Minutes @ 12 Volts, 10 Minutes @ 24 Volts
- Output: 7 GPM @ 12 Volts, 10 GPM @ 24 Volts
- Connections: (2) 3/4" Hose Barbs
- Hose: 13 Feet w/ Dispensing Nozzle
- Filter: 60 Mesh (330 Micron) Fine Mesh Screen
- Integral Bypass Valve
- Carrying Handle
- Self-Priming
- Massive 2800 RPM, 16 amp (12 V), 26 Amp (24V) Permanent Magnet Motor
- Ideal For Pumping Waste Oil (Not recommended for Methanol)
- Pump Technical Data (pdf)
IMPORTANT NOTE:
While this is a wonderful pump, it's still an electrical device. Do not run the pump past it's duty cycle.
Duty cycle is 30 min @ 12 volts and 10 minutes @ 24 volts. Allow at least 10-15 minutes between duty cycles.
Running the pump longer than the duty cycle may damage the motor and void the warranty.
DISCONTINUED. Fill-Rite can't seem to get them anymore.
In the mean time, we're recommending visiting Redline Pumps
as they have some great 12 volt solutions.
