Utah Biodiesel Supply


CONTACT US
ABOUT US
TESTIMONIALS
WHY SHOP HERE?
PLACING AN ORDER
SHIPPING INFORMATION
STORE POLICIES
PRIVACY POLICY
IN THE NEWS
OUR PHOTO GALLERIES
BEER (Stainless)
COFFEE (Stainless)
CUSTOM (Stainless)
STAINLESS SCREEN
- Compare Screen Sizes

BAG/SOCK (Poly)
BUCKET (Poly)
BUCKET (Stainless)
DRUM (Poly Mesh)
DRUM (Stainless)
FUEL FILTERS (Bowl)
FUEL FILTER HEATER
INLINE FILTERS
SUCTION / PUMP
TOTE (Stainless)
ALL TUTORIAL ARTICLES
WHAT IS BIODIESEL
GETTING STARTED
TUTORIAL VIDEOS
TUTORIAL DVD

HOW TO COLLECT OIL
HOW TO DRY OIL
HOW TO TITRATE OIL
HOW TO MAKE BIODIESEL
HOW TO TEST BIODIESEL
HOW TO USE BIODIESEL

WHY BIODIESEL?
BASICS OF BIODIESEL
ASTM TESTS EXPLAINED
TAX INCENTIVES
MORE BIODIESEL TUTORIALS
BIODIESEL FORUMS
BIODIESEL PROCESSOR
BIODIESEL WASH TANK
63 GAL BIO PROCESSOR
500 GAL BIO PROCESSOR
OIL/BIODIESEL DRYING TANK
OIL COLLECTOR (Supersucker)
SOAP MAKING BOOK
WASTE OIL HEATER
WASTE OIL BOILER
BABINGTON BALL HEATER
** CLICK HERE **
FOR CLEARANCE
& USED ITEMS

Products Are Grouped In Red
By Product Type And
Listed Alphabetically

ACCESSORIES
-BEAKERS (Poly)
-BEAKERS (Glass)
-BUCKET LIDS (Sealable)
-CARBOYS
-COLLECTION DRUM LIDS
-DRUM HEATER
-DRUM BUNG WRENCH
-ELECTRICAL ITEMS
-FILTERS (Bag Poly Felt/Mesh)
-FILTERS (Brewing)
-FILTERS (Bucket Poly/Nylon)
-FILTERS (Bucket Stainless)
-FILTERS (Custom)
-FILTERS (Drum Mesh)
-FILTERS (Drum Poly/Nylon)
-FILTERS (Drum Stainless)
-FILTERS (Fuel Filter)
-FILTERS (Stainless Mesh)
-FILTERS (Suction)
-FILTERS (Tote Stainless)
-FLOW METER (Digital)
-FUNNEL (Drum-Threaded)
-FUNNEL (Drum-Nonthreaded)
-PTFE PIPE TAPE
-PORTABLE FUEL CARTS
-PLUMBING FITTINGS
-QUICK CONNECT CAMLOCKS
-SAMPLING CUPS
-SCALES
-SEAL PRO LIDS

BIODIESEL KITS
-BIODIESEL PROCESSOR
-BIODIESEL WASH TANK
-CONVERSION TEST KITS
-METHANOL TEST (Deluxe)
-METHANOL TEST (Ultimate)
-OIL GO/NO GO KIT (BioPro)
-OIL GO/NO GO KIT (General)
-OIL TITRATION KIT (Mini)
-OIL TITRATION KIT (Basic)
-OIL TITRATION KIT (Deluxe)
-PH TESTING STRIPS KIT
-SOAP TEST KITS
-STARTER KIT-BASIC
-STARTER KIT-DELUXE
-STARTER KIT-ULTIMATE
-WATER TEST KIT

BIODIESEL PROCESSOR
(BIO PRO PROCESSORS)

-BIO PRO 190 (Up To 50 Gal)
-BIO PRO 380 (Up To 100 Gal)
-PRESSURIZED WATER KIT
-BIO PRO INCOSEP
-BIO PRO ACCESSORIES
-BIO PRO CONVERSION KIT
-BIO PRO GO/NO GO KIT
-OXIDATIVE STABILIZER
-PORTABLE FUEL CARTS
-SPRING FLOW 250
-SPRING PRO T76 DRY WASH

BIODIESEL PRODUCTS
-GLYCERIN BAR SOAP
-TIKI TORCH FUEL

BIODIESEL HOSE
-BIODIESEL PUMP HOSE
-BIODIESEL FUEL LINE

BIODIESEL TESTING
-ASTM TESTING
-CONVERSION TEST KIT
-MAGNETIC STIRRER
-OIL GO/NO GO TEST KITS
-PH TESTING STRIPS
-SOAP TEST KITS
-WATER TEST KIT

BIODIESEL TREATMENTS
-BIOCIDE TREATMENT
-OXIDATIVE STABILIZER

BOOKS, DVD's, & PUBLICATIONS
-BIODIESEL BOOKS
-BIODIESEL DVD

CARBOYS
-1 LITER CARBOY
-5 GAL/20 LTR CARBOYS
-CARBOY HOSE BARBS
-CARBOY HOSE CLAMPS
-CARBOY LIDS
-CARBOY SPIGOTS
-CARBOY VENT CAPS
-CARBOY QUICK CONNECTS

CENTRIFUGES
-CENTRIFUGE (Lab)
-CENTRIFUGE TUBES (Lab)
-CENTRIFUGE (Oil Filtering)

CHEMICALS
-BROMOPHENOL BLUE
-HYDROCLHORIC ACID
-ISOPROPYL ALCOHOL
-METHANOL
-PHENOLPHTHALEIN
-POTASSIUM HYDROXIDE
-SODIUM HYDROXIDE
-SULFURIC ACID

DIESEL VEHICLE ITEMS
-BIODIESEL FUEL LINE
-FUEL FILTER HEATERS
-FUEL PUMP

DRUM & BARREL ACCESSORIES
-BIODIESEL PUMP (AC)
-DRUM BUNGS (Poly)
-DRUM BUNG WRENCH
-DRUM CONE (Weldable)
-DRUM CONE FUNNEL
-DRUM FILTER (Poly Mesh)
-DRUM FILTER (Poly/Nylon)
-DRUM FILTER (Stainless)
-DRUM FILTER (For Bungs)
-DRUM HEATER (250 W)
-DRUM HEATER (300 W)
-DRUM HEATER (1000 W)
-DRUM HEATER (1200 W)
-DRUM LIDS (Locking)
-DRUM PUMP (Electric)
-DRUM PUMP (Lever)
-DRUM PUMP (Rotary)
-DRUM PUMP (Siphon)
-METHANOL PUMP (AC)

DRY WASHING SUPPLIES
-BD ZORB MEDIA
-DRY WASH PUMP (Air)
-DRY WASH PUMP (Electric)
-DRY WASH RESIN (DW-R10)
-SOAP TEST KITS
-SPRING PRO T76 DRY WASH
-STAINLESS MESH SCREEN

FILTERS
-BAG/SOCK (Poly)
-BEER BREWING (Stainless)
-BUCKET (Poly/Nylon)
-BUCKET (Stainless)
-CENTRIFUGE
-CUSTOM FILTERS (Stainless)
-DRUM (Poly Mesh)
-DRUM (Poly/Nylon)
-DRUM (Stainless Steel)
-FUEL FILTERS (Bowl)
-FUEL FILTER HEATERS
-STAINLESS MESH SCREEN
-SUCTION / PUMP FILTERS
-TOTE (Stainless Steel)

HEATERS
-ALCOHOL STOVE
-BABINGTON BALL HEATER
-DRUM HEATER (250 W)
-DRUM HEATER (300 W)
-DRUM HEATER (1000 W)
-DRUM HEATER (1200 W)
-FUEL FILTER HEATERS
-HEAT EXCHANGER (Plate)
-HEAT EXCHANGER (Tube)
-HEATING ELEMENT (1500 W)
-INLINE HEATER (1000 W)

LAB EQUIPMENT
-32 oz/ 950 mL BOTTLE
-BEAKERS (Glass Multi-sized)
-BEAKERS (Poly 100mL)
-BEAKERS (Poly 250mL)
-BEAKERS (Poly Multi-sized)
-BIODIESEL LAMP
-BOTTLE (Poly 1000mL)
-BURETTES (Glass)
-CENTRIFUGE (Hand Operated)
-CENTRIFUGE TUBES (15 mL)
-CENTRIFUGE TUBES (50 mL)
-ERLENMEYER FLASKS
-GRADUATED CYLINDERS
-GRADUATED PITCHERS
-HYDROMETER (Methanol)
-PH TESTING STRIPS KIT
-PIPETTES (Disposable 3ml)
-PIPETTES (Glass 1, 10, 25)
-PIPETTE PUMPS (2, 10, 25)
-PIPETTE STANDS
-PORTABLE STOVE
-SAMPLING CUPS (Poly)
-SAMPLING VIALS (45 mL)
-SAMPLING VIALS (100 mL)
-SEPARATORY FUNNEL
-SCALES
-SYRINGES (Labelled)
-SYRINGES (Multi-Packs)
-THERMOMETER (5" Pocket)
-THERMOMETER (12" Probe)
-TITRATION KITS
-WASH BOTTLES (Poly)
-WATER TEST KIT

MAGNETIC STIRRERS
-MINI STIRRER
-STANDARD STIRRER
-STAINLESS STIRRER
-HEATED STIRRER

OIL COLLECTION
-BARREL PUMP
-COLLECTION DRUM FILTERS
-COLLECTION PUMP (Electric)
-COLLECTION PUMP (Gas)
-LOCKING DRUM LIDS
-OIL GO/NO GO KITS
-OIL TITRATION KITS
-SAMPLING CUPS
-SAMPLING VIALS

OIL TREATMENTS
-BIOCIDE TREATMENT
-OXIDATIVE STABILIZER

PROMOTIONAL ITEMS
-APPAREL-Shirts & Hats
-BIODIESEL SAMPLES
-BUMPER STICKERS
-EMBLEMS
-LICENSE PLATES
-VINYL DECALS

PROCESSOR SUPPLIES
-PROCESSOR KIT
-CATALYST SCALES
-ELECTRICAL
-METHANOL PUMP
-PROCESSOR FITTINGS
-PROCESSOR PUMP
-STEEL DRUM CONE
-TEMP GAUGE
-PROCESSOR VALVES

PUMPS
-BIODIESEL PUMP (Electric)
-FUEL PUMP (Vehicle)
-FUEL HOSE (Vehicle)
-GEAR PUMP-STATIONARY
-GEAR PUMP-PORTABLE
-METHANOL PUMP (Electric)
-METHANOL PUMP (Rotary)
-METHANOL PUMP (Siphon)
-OIL COLLECTION PUMP
-PIPETTE PUMPS (2, 10, 25)
-PORTABLE FILLING STATION
-PROCESSOR PUMP (Electric)
-SULFURIC ACID PUMP

SAFETY EQUIPMENT
-SAFETY GOGGLES

SCALES
-BIODIESEL SCALE
-TITRATION SCALE

SOAP MAKING SUPPLIES
-ESSENTIAL OILS
-GLYCERIN BAR SOAP
-GLYCERIN LIQUID SOAP
-POTASSIUM HYDROXIDE
-SODIUM HYDROXIDE
-SOAP MAKING KIT
-SOAP MAKING BOOK

TITRATION SUPPLIES
-MAGNETIC STIRRER
-OIL TEST KIT
-SAMPLING CUPS
-SYRINGES (Labelled)
-SYRINGES (Multi-Packs)
-TITRATION GO/NO GO KIT
-TITRATION KIT (Mini)
-TITRATION KIT (Basic)
-TITRATION KIT (Deluxe)
-TITRATION BEAKERS
-TITRATION CHEMICALS
-TITRATION PIPETTES
-TITRATION SCALES

WATER WASHING SUPPLIES
-STEEL DRUM CONE
-WASH TANK KIT
-WASH TANK DRYING KIT
-WASH TANK BUBBLERS
-WASH TANK FITTINGS
-WASH TANK HEATER 1000 W
-WASH TANK HEATER 250 W
-WASH TANK MISTERS
--Dry Pro Drying Nozzle
--Fogg-It Misters (5 Types)
--Mist Pro Mister
--Wash Pro Mister
--Orbit 5 Head Misting Set
-WASH TANK PARTS
-WASH TANK STANDPIPE
-WASH TANK VALVES
ASTM TESTING
BIODIESEL COOPS/GROUPS
BUYING BIODIESEL
FINDING A DIESEL
LOG YOUR BIODIESEL
SHARE YOUR PICTURES
OTHER HELPFUL WEBSITES
BIODIESEL TUTORIAL
COLLECTIVE BIODIESEL
BIODIESEL PICTURES
BIODIESEL LOG
MAKE BIODIESEL
MURPHYS MACHINES
NEEDASTICKER
Official PayPal Seal


Brew your best with our stainless steel brewing filters
Ideal for brewing beer, coffee, tea, and more!

BREWING FILTERS INDEX
Our brewing filters typically take about 7-10 business days to ship.

Inventory Clearance Sale!
Score a deal on our scratch & dent, factory seconds filters!

Click Here To See Our Current Selection

Join Our Brewing Filters Email List!
Join and you'll be the first to know about new filters we release,
cool combo packs, special discounts, and the latest custom filters!


Need a custom filter? Let us build one for you!
4 inch stainless dry hopper beer filter
4" Hop Spider
6 inch stainless dry hopper beer filter
6" Hop Spiders
8 inch stainless dry hopper beer filter
8" Hop Spider
10.5 x 16 inch stainless dry hopper beer filter
10.5" Hop Spider
6 inch stainless keggle beer brewing dry hopper with outside hook
6" Keggle (Outside Hook)
6 inch stainless keggle beer brewing dry hopper with center hanging hook
6" Keggle (Center Hanging)
stainless steel beer brewing mash strainer
9.75" x 8"
Mash Strainer
stainless steel brew in a basket beer brewing filter
Custom Sized
Brew In A Baskets
stainless beer brewing brew in a basket kettle combination package
Ultimate Brew In A Basket
Kettle/Combo Package
corny keg dry hopper for beer brewing
Corny Keg
Dry Hopper
corny keg lid with adjustable chain
Corny Keg Lid
With Adjustable Chain
glass carboy dry hopper for beer brewing
Glass Carboy
Dry Hopper
better bottle dry hopper for beer brewing
Better Bottle
Dry Hopper
auto siphon filter for auto siphons
Auto Siphon
Dip Tube Filter
filter housings for beer filter housing
Hop Back / Hop Randall
Filter Housings
stainless filter cartridge for beer filter housing
Hop Back / Hop Randall
Stainless Filter Cartridge
inline stainless filter
Inline Filter Assembly
6 inch stainless bazoka kettle screen for beer brewing
12 inch stainless bazoka kettle screen for beer brewing
12" Brewing Kettle
Kettle Screens
stainless brewing filter for braumeister speidel beer brewing systems
Braumeister
20 Liter Filter
stainless brewing filter for braumeister speidel beer brewing systems
Braumeister
50 Liter Filter

Several Different Brewing Filter Combination Packs

Wine Filters

Custom Brewing Filters
Don't see what you need below? We can custom build one for you!
Click Here To See Examples


Brewing beer?
Be sure to check out our 316 Stainless Steel Flat Plate Chillers!
and our great selection of glassware for mixing up yeast!

We have a great selection of filters but we can also do custom filters too! Take a look through our selection and if you don't see what you need, contact us for a custom filter quote!


Check Out This Awesome Customer Brewing Setup
Utilizing Our Stainless Brewing Filters

Customers Love The Results!
I recently purchased a kettle hop filter along with a dry hop filter for my keg from Utah Biodiesel Supply. Both of these came as a package deal which saves you money. Both of these products are high quality well made filters, They are solid and robust with top notch welds.

On my previous brews, I used a home made hop spider made of a nylon paint filter and a disposal drain sink connector. At best it did an adequate job, but still did not filter out a good portion of the hops. I also used stainless steel nuts to weigh the filter bag to prevent the hops from boiling out. Clean up with a hassle, and since the bag was nylon, this meant replacing the bag once it turned green.

Now enter Utah Biodiesel Supply Hop Spider and a world of difference. As you can see by the picture of my brew kettle the hop spider kept all of the hops in the filter and the wort was clear with no hops. I used the hop spider first for the wort run off to filter out any grains or fines. You can also tell by the pictures of the fermenters which one use the stainless steel hop spider. There is about a three inch difference in material between the two. The hop filter contained 6 ounces of hops with plenty of room to spare. Clean up is a snap, drop the spent hops in the garbage, then a quick rinse before your equipment cleanup.

I would highly recommend purchasing hop filters from Utah Biodiesel and if you have any questions, Graydon is wonderful to work with.
- Mark J

FILTER SIZING RECOMMENDATIONS
Diameter: - For best hop utilization, select a hop spider that's at least half the diameter of your brewing kettle. For example, our 4" diameter filter works great in up to 8" diameter kettles, our 8" works great up to 16" diameter kettles and so on.

Height: - Select a hop spider that can reach to within 1" to 3" of the bottom of your kettle. By keeping off the bottom slightly you allow better wort circulation up through the bottom of the hop spider.

Straight Side Hooks: - We give our filters plenty of room on their side hooks to grip the outer edge of brewing kettles. For example below is a picture of our 10.5" diameter hop spider sitting on a 21" diameter opening. As you can see there's plenty of room even at 21" diameter for it to hook, even if the kettle had a 1/2" lip.


CLEANING TIPS
For best results, immediately after use, hose off the filter with a high pressure stream of water such as a garden hose. Click Here to see an example of cleaning one of our stainless steel filters with water.
For stubborn protein and hop residue, soak at 180° F in PBW. Let soak overnight & rinse with hot water.

KETTLE BREWING "HOP SPIDERS"

4" x 10" Stainless Steel Brewing Filter | BACK TO TOP
4 inch diameter hop spider in mega pot
Shown in a 10 gallon 14" diameter x 16" tall brewing kettle
4x10 inch 300 micron brew filter hops spider filter

Description:
These stainless steel filters are perfect for containing hops while brewing beer! Known as a hop spider, hops filter, beer wort cup, wort scoop cup, hop basket, or just plain beer brewing filter, they sit inside a brewing kettle and keeps the hops contained during the brewing process. They are great for keeping the hop gunk from building up on the bottom of your kettle and also help to keep your plate chiller from plugging up.

The basket is made from 100% 304 stainless steel. The stainless mesh is available in 300 or 400 micron, which based on experience among home brewers seems to be the sweet spot for containing the hops. For pellet hops, 300 micron works the best and 400 micron works best with whole leaf hops. 400 micron will also work with pellet hops, but 300 micron tends to contain the dust better.

We've also had several customers use these filters to brew coffee and tea with as well. Customers have told us that these filters rock! Especially when used with hot brewing where plastic filters tend to melt.

If your brewing kettle is just taller than 10", this filter is the ideal hop spider, hops filter as it gives you plenty of surface area for brewing, stays off the bottom, and still sits flush with the top of your brewing kettle so it won't get in the way.

The 4" Diameter brewing filters can utilize up to 4 oz of hops effectively. Need to utilize more hops? Check out our larger filters below!

Recommended Batch Size
4" can utilize up to 4 oz hops effectively.

Micron Recommendation:
300 Micron - Best for pellet hops
400 Micron - Best for whole leaf hops

Specifications:
4" x 10" - 125 Cubic Inch Capacity
300 or 400 Micron Stainless Steel Mesh
Ideal for 5 to 10 Gallon Kettles Up To 8" diameter

Customer Feedback:

"Love my new hop spider. Not only do I use it in the boil, but I sanitize it and rack my beer thru it to reduce the trub from getting into my secondary. I always had to discard the last 1/2 gallon of beer so crap didn't get in my secondary. Not now. I get that last drop thanks to your product! Love it!" - Mark

"This is a well made product. Its something every brewer should purchase. I use it for hops in the boil kettle as well as filtering the wort going into the fermenter. It's easy to clean. Buy this and you will never regret it!" - Nick

"I just bought a kettle hop screen & two of the carboy dry-hop screens a few weeks ago. Kettle screen is AWESOME!!! I can't ever imagine going back to bags, seriously saves me 30 minutes on my brew day.... The quality was super awesome, I will be definitely telling anyone who will listen to get your stuff." - John Fauller

Proudly built in the USA!
Ships for free within continental United States.
Can be shipped internationally, contact us for a ship quote.

4" x 10" Stainless Steel Hop Brewing Filter

Price: $42.50
Free Shipping Within Continental United States

6"x10", 6"x11", 6"x12", 6"x14", 6"x16", 6"x19" Stainless Steel Brewing Filters | BACK TO TOP
6 inch hop spider in a mega pot
Shown in a 10 gallon 14" diameter x 16" tall brewing kettle
6x14 inch 300 micron brew filter hops spider filter6x14 inch 300 micron brew filter hops spider filter
6x14 inch 300 micron brew filter hops spider filter6x14 inch 300 micron brew filter hops spider filter

Description:
These brewing filters is nearly identical to the one above except they have a larger 6" diameter. They're also made from 100% 304 stainless steel and are available in 300 or 400 micron as the stainless mesh on the side and bottom.

See our video overview of our 6" diameter filters!

To fit a variety of brew kettles, these brew filters are 6" diameter and can be purchased in 10", 11", 12", 14", 16", and 19" tall. They each have two hangers on the side to attach them to a brewing kettle. One hanger spans all the way across the filter to make a nice handle for removing the filter from the brewing kettle.

We stock all our 6" filters in 300 micron and stock the 6"x14" in 400 micron as well. The 6" stainless brewing filters can also be ordered in 400 micron but are built only when ordered and may take up to 2 weeks to ship.

Recommended Batch Size: 6" Diameter works great with brew kettles up to 12 gallons.
Making larger batch sizes? Check out our larger filter below!

Micron Recommendation:
300 Micron - Best for pellet hops
400 Micron - Best for whole leaf hops

Specifications:
6" x 10" - 282 Cubic Inches
6" x 11" - 311 Cubic Inches
6" x 12" - 339 Cubic Inches
6" x 14" - 395 Cubic Inches
6" x 16" - 452 Cubic Inches
6" x 19" - 537 Cubic Inches
300 or 400 Micron Stainless Steel
Ideal For 10-15 Gallon Kettles Up To 12" Diameter

Customer Feedback:
"Before now, I'd sworn off pellet hops and only used leaf because the pellets made a big mess of my system, and I didn't want to fool around with hop bags. With so many hop varieties available as pellets, I decided to give this filter a shot. I don't regret a single penny spent on it--it is truly the best investment that I've made in my brew setup. It was easy to use, easy to clean, and it kept back 99% of the hop matter from getting into the fermenter. I also used it while sparging to capture any loose grain particles or husks--super clear wort! I'm glad that I went with the larger 6"x14" filter, instead of the 4"x10" filter. I use a converted keggle, but only do 5 gallon batches (I also occasionally use a 7.5 gallon kettle for 5 gallon and smaller batches). The versatility of this size is what sold me. Go big, or go home." - Collin

"I'm really liking how easy the hop filter makes things, especially with a hoppy IPA that has multiple additions throughout the boil. We did a 10 gallon batch and used around 400g of hops in the boil and it was so easy. Cleanup was a breeze." - Justin from Australia
- Click here to see Justin's sweet brewing setup!

Proudly built in the USA!
Ships for free within continental United States.
Can be shipped internationally, contact us for a ship quote.

6" x 10" Stainless Steel Hop Brewing Filter

Price: $58.00 Free Shipping Within Continental United States

6" x 11" Stainless Steel Hop Brewing Filter

Price: $60.00 Free Shipping Within Continental United States

6" x 12" Stainless Steel Hop Brewing Filter

Price: $65.00 Free Shipping Within Continental United States

6" x 14" Stainless Steel Hop Brewing Filter

Price: $75.00 Free Shipping Within Continental United States

6" x 16" Stainless Steel Hop Brewing Filter

Price: $90.00 Free Shipping Within Continental United States
6" x 19" Stainless Steel Hop Brewing Filter

Price: $95.00 Free Shipping Within Continental United States

8" x 14", 8" x 16" Stainless Steel Brewing Filter 300 / 400 Micron | BACK TO TOP

Shown in a 10 gallon 14" diameter x 16" tall brewing kettle
8x16 300 Micron Beer Brewing Filter

Description:
Looking for a slightly bigger brewing filter? This one may be just what your brew kettle is asking for! It's 8" diameter, 14" or 16" tall and features our same heavy duty 300 micron stainless steel on the side and bottom.

The hooks at the top are the same as our 4" and 6" brew filters making it easy to attach to brewing kettles, helps keep your hop gunk from building up in your kettle or plugging your plate chiller, and are easily washable when finished.

Recommended Batch Size: 8" Diameter works great with brew kettles up to 15 gallons.
Making larger batch sizes? Contact us for a custom built larger diameter filter.

Micron Recommendation:
300 Micron - Best for pellet hops
400 Micron - Best for whole leaf hops

Kettle Sizing
Ideal for kettles up to 16" diameter

Proudly built in the USA!
Ships for free within continental United States.
Can be shipped internationally, contact us for a ship quote.

8" x 14" Stainless Steel Brewing Filter - Straight Hooks

Price: $85.00 Free Shipping Within Continental United States
8" x 16" Stainless Steel Brewing Filter - Straight Hooks

Price: $95.00 Free Shipping Within Continental United States

10.5" x 14" & 10.5" x 16" Stainless Steel Brewing Filter 300 Micron | BACK TO TOP
10.5 x 16 300 Micron Hop Spider Beer Brewing Filter10.5 x 16 300 Micron Hop Spider Beer Brewing Filter

Description:
Need an even bigger brewing filter? Check out this awesome stainless steel brewing filter!
It's 10 1/2" diameter, stands either 14" or 16" tall and is made from our high quality heavy duty 300 micron stainless steel on both the side and bottom. It ships with the same style hooks that our 4", 6", and 8" brewing filters have allowing it to hook directly to the side of your brewing kettle.

Recommended Batch Size: 10.5" Diameter works great with brew kettles for 15+ gallons
Making really large batch sizes? Contact us for a custom built larger diameter filter.

Micron Recommendation:
300 Micron - Best for pellet hops
400 Micron - Best for whole leaf hops

Kettle Sizing
Ideal for kettles up to 21" diameter

Customizable
Need to customize your filter? We can do that! If you can draw it out, we can probably build it.
Check out this sweet 10.5" x 30" tall 300 dry hopper we built for a customer from Switzerland in action!


Check out this awesome customer video of one of our 10.5" x 16" customized filters in use!

Proudly built in the USA!
Ships for free within continental United States.
Can be shipped internationally, contact us for a ship quote.

10.5" x 14" Stainless Steel Brewing Filter - Straight Hooks
- Shipping To Non-Western United States (Excludes WA, OR, CA, NV, ID, UT, AZ, NM)

Price: $120.00
Shipping To Non West Coast States United States
10.5" x 14" Stainless Steel Brewing Filter - Straight Hooks
- Shipping To Western States (Includes WA, OR, CA, NV, ID, UT, AZ, NM)

Price: $140.00
Shipping To Western United States

10.5" x 16" Stainless Steel Brewing Filter - Straight Hooks
- Shipping To Non-Western United States (Excludes WA, OR, CA, NV, ID, UT, AZ, NM)

Price: $130.00
Shipping To Non Western States United States
10.5" x 16" Stainless Steel Brewing Filter - Straight Hooks
- Shipping To Western States (Includes WA, OR, CA, NV, ID, UT, AZ, NM)

Price: $150.00
Shipping To West Coast United States

KEG ("KEGGLE") BREWING FILTERS

6" x 14" Stainless Keg "Keggle" Brewing Filter (Outside Hook) 300 or 400 Micron | BACK TO TOP
6x14 300 Micron Outside Hook Hop Spider Keggle Keg Filter

Description:
This is just like our filters above except that it's built to fit inside a beer keg converted for beer brewing, commonly called a keggle. The brewing filter is 6" diameter, 14" tall and features a heavy duty 300 micron stainless steel mesh screen on the side and bottom.

The hook attached to the top is 4" tall with a 2" extension with a 1" hook making the complete filter and hook combined 18" tall. It's a perfect fit for most keggles and the 300 micron mesh is awesome at keeping your hop gunk from building up in your keggle or plugging your plate chiller!

Micron Recommendation:
300 Micron - Best for pellet hops
400 Micron - Best for whole leaf hops

Proudly built in the USA!
Ships for free within continental United States.
Can be shipped internationally, contact us for a ship quote.

6" x 14" Stainless Steel Keg Brewing Filter With 4" Outside Hook

Price: $85.00
Free Shipping Within Continental United States

6" x 14" Stainless Keg "Keggle" Brewing Filter (Center Hanging) 300 Micron | BACK TO TOP
6 x 14 300 Micron Outside Hook Keggle Hop Spider Keg Filter

Description:
This is the exact same filter as above except it has bars across the top that allow it to be suspended right in the center of a brewing keg. It has hooks on one end and drilled holes on the other end making it versatile to use in brewing kegs, brewing kettles, or other containers where centrally locating the filter is desired.

The brewing filter is 6" diameter, 14" tall and features a heavy duty 300 micron stainless steel mesh screen on the side and bottom.

It's a great fit for most keggles and the 300 micron mesh is awesome at keeping your hop gunk from building up in your keggle or plugging your plate chiller!

Micron Recommendation:
300 Micron - Best for pellet hops
400 Micron - Best for whole leaf hops

Proudly built in the USA!
Ships for free within continental United States.
Can be shipped internationally, contact us for a ship quote.

6" x 14" Stainless Steel Keg Brewing Filter With Center Hanging Hooks

Price: $80.00
Free Shipping Within Continental United States

9 3/4" x 8" 800 Micron Mash Strainer | BACK TO TOP

Description:
Looking for an easy way to strain your grain mash without making a mess? Then check out our heavy duty stainless steel 800 micron beer brewing grain mash strainer!


We created this filter based on several requests for an easy to use strainer basket to strain grain mash in! We started by making the diameter small enough so that it would fit inside most beer brewing kettles as well as 5 gallon buckets (yep! Fits them perfectly!). Then we made it 8" tall. This is deeper than our stainless steel bucket filters which means it can accomadate more mash (nearly double the depth of the bucket filter).

For screen material, we went with our heavy duty 800 micron screen. This size is perfect for most grains in that it doesn't plug up like say a 600 micron screen might but also doesn't let the mash through like a 1000 micron screen might. It's also the most popular micron size of our kettle screens making it ideal for straining mash.


The next thing we did is give the filter really nice heavy duty double welded stainless steel tabs that extend out to 16". This means not only will it work great in 5 gallon buckets or smaller brewing kettles, but you can use it in larger diameter kettles as well! It also happens to perfectly fit our Ultimate Brew-In-A-Basket 42 Quart 10.5 Gallon Stainless Brewing Kettle too!

Finally, to make it extremely easy to handle, we added a heavy duty stainless steel handle that lets you easily move the strainer around and then quickly swings out of your way once the strainer is in place.

In short, if you're looking for the ultimate portable mash strainer that'll work with a wide selection of brewing kettles, then you'll absolutely love this strainer! Grab one today & make straining your mash a cinch!

Proudly built in the USA!
Can be shipped internationally, contact us for a ship quote.

9.75" x 8" 800 Micron Mash Strainer With Swing Handle & Hooks Out To 16"
- Shipping To Non-Western United States (Excludes WA, OR, CA, NV, ID, UT, AZ, NM)
Price: $80.00
Shipping: $20.00 To Non-Western United States
9.75" x 8" 800 Micron Mash Strainer With Swing Handle & Hooks Out To 16"
- Shipping To Western United States (Includes WA, OR, CA, NV, ID, UT, AZ, NM)
Price: $80.00
Shipping: $28.00 To Western United States

Brew In A Basket (BIAB) Brewing Filters With Swing Handles & Optional Press Plates
234/300/400/500/600/800 Micron
|
BACK TO TOP

stainless brew in a basket 400 micron BIAB

Description:
Check out our Brew-In-A-Basket brewing filters! They've been extremely popular with our brewing customers and they love the results they're getting! We've taken the traditional Brew In A Bag concept and stepped it up to a Brew In A Stainless Steel Basket idea! You get the same results as brewing in a bag, but now you have a much easier way to do it!

To make these filters really robust, we build them out of high quality 304 stainless steel, add heavy duty side supports and a cross brace support on the bottom. We also add a heavy duty swing handle that lays flush with the top of the filter.

Optional Press Plate

If you have the desire to "press" or "squeeze" your mash while you're brewing, you can add the optional press plate too! The all stainless steel press plate fits perfectly inside the Brew In A Basket filter and comes with a handle for ease of use. It makes pressing the mash a cinch!

Custom Built To Your Kettle Size

With so many brew kettles available, we give you the option to specify exactly how tall and wide you want your Brew In A Basket brewing filter to be built up to 15". If you don't see the size you would like, feel free to contact us for a quote & we'll get one quoted for you.

Custom Sized Feet


In addition to building your Brew In A Basket to fit your kettle, we also give you the ability to add custom sized feet up to 5" tall to the bottom as well. If specified, we build the feet from heavy duty stainless bar stock and then add heavy duty food grade rubber feet rated for up to 250° F to the bottom of each foot pad. This allows your Brew In A Basket to sit nice and flush with the bottom of your kettle while the rubber feet keep it from maring up the finish. To add the feet, just specify a length below.

Extra Custom Features Available
We can also add special features to your Brew In A Basket brewing filter as well such as different sized micron mesh, cut outs, side hooks, and solid handles across the top or just about anything else you can think of. If you can describe it, we can probably build it. Click Here to see just a few of the cool custom Brew In A Basket brewing filters we've built for our brewing customers.

High Quality Construction
From the moment you take it out of the box, you'll see why people love our Brew In A Basket Brewing Filters! They're proudly built in the United States by professional welders who take great care to build a quality product that you'll get years of use out of! Order one today to enjoy all the benefits of brewing in a basket with these awesome stainless steel brew in a basket brewing filters!

Video Overview

Our Customers Love Them!
Andrew loves his 13" x 10" stainless brew in a basket with press plate! He also uses one of our 6" x 10" 300 Micron Hop Spiders too! In these shots he's making a special pumpkin brew with them!


An example of 20 lbs of grain in a 15" diameter x 13" tall Brew In A Basket w/ custom grab bars
"We are extremely satisfied with the filter and the workmanship put into it!" - Chris Wenske
Click here to see more pictures of the filter we built for Chris

Ann Arbor Brewers Guild had one custom built and produced this awesome video of their Brew In A Basket in action!

Micron Recommendations:
234 - Great for herbal brewing, essential oils, & medicinal items
300 - Great for pellet hops
400 - Great for whole leaf hops & grain brewing (most popular size)
500-600- Great for larger grains
800 - Great for mash straining
Click Here for a comparison of the different micron sizes


ORDERING:
To Order A Brew-In-A-Basket:
1) Choose Correct Size (Up to 13" or 14" to 15")
--NOTE: Measure the inside diameter of your kettle.
- Select a filter diameter that is at least 0.5" smaller than inside diameter of your kettle
- This accounts for the side supports and also allows some wiggle room to get the filter into the kettle

2) Select Filter Diameter & Height Options
3) Select Feet Size
-- NOTE: Adding feet increases total filter height above Height option chosen
4) Select Micron Size (see recommendations above, 400 is best for grain brewing)
5) Select Press Plate option
6) Choose Correct Shipping Location (Non-Western or Western States) (Up to 13" filters)
7) Click the Click Here To Purchase button
8) Continue shopping or check out.

Once we receive your order, the order is sent over to our awesome fabrication shop and work is started on it. We typically have them built and ready to ship within 2-3 weeks. Once built, we ship them right to your door! (We can ship these internationally too! Contact us for a ship quote!)

BIAB's UP TO 13" DIAMETER
Brew-In-A-Basket Stainless (Up to 13") Non-West Coast Continental US
- Shipping To Non-Western United States (Excludes WA, OR, CA, NV, ID, UT, AZ, NM)

Price: $146.00
Shipping: $32.00
Diameter Height: Feet:
Micron: Press Plate
Brew-In-A-Basket Micron Stainless (Up to 13") West Coast Continental US
- Shipping To Western United States (Includes WA, OR, CA, NV, ID, UT, AZ, NM)

Price: $146.00
Shipping: $45.00
Diameter Height: Feet:
Micron: Press Plate
BIAB's 14" to 15" DIAMETER
Brew-In-A-Basket Stainless (14" to 15")

Price: $169.00
Shipping: $45.00
Diameter Height: Feet:
Micron: Press Plate
Shipping to Alaska, Hawaii, or International? Contact Us for a ship quote.

Need a Brew-In-A-Basket size not listed? We can custom build one for you!
Contact Us for a quote.

Be sure & let us know your desired diameter, height, feet length, if you want a press plate,
any special modifications, and your location (city/state/zip or country) so we can quote shipping too.

Click Here to see some of the custom BIAB's we've built!

BIAB SIDE DRAINING HOOKS ADD ON OPTION
Add a set of 2 side draining hooks to your filter to allow it to drain in your kettle!
Be sure your filter will still fit inside your kettle with the draining hooks installed.
--The hooks will add 1" to the diameter of the filter.
-- Adjust filter diameter to be at least 1.5" smaller than the kettle inside diameter.
-- This accounts for the draining hooks & side supports and still allows wiggle room for the filter to fit the kettle

A) Choose how high up the drain hooks should be mounted on the side of your filter.
- The measurement is taken "from the floor" up and includes any feet (if added to your filter)
- Hook measurement must be larger than feet length (can only be mounted to the filter)
- Typical height is about 3" to 6" up from bottom of filter plus feet height

B) Choose U-Support Size
- Pick the outside diameter of your kettle
- If not available, round up to nearest measurement.

ADD ON - Set of 2 Side Drain Hooks & U-Support Drain Bar
Price: $30.00

Side Hook Placement - Must be higher than feet length
U-Support Drain Bar
ADD ON - Second Set Set of 2 Side Drain Hooks
Price: $15.00 - First Set Of Hooks Must Be Ordered Also

2nd Set Side Hook Placement
- Must be higher than feet length

Replacement Rubber Feet For Brew In A Basket Filters
Need a new set of rubber feet for your BIAB? Or just want to keep an extra set handy? Grab them here.
(1) Set of 4 Replacement Rubber Feet For BIAB's
Price: $12.00
Free Shipping Within Continental United States
(1) Set of 8 Replacement Rubber Feet For BIAB's
Price: $18.00
Free Shipping Within Continental United States


BREW-IN-A-BASKET / KETTLE COMBO

Take a look at our awesome Ultimate Brew-In-A Basket Combination Package! We've packed it with a bevy of brewing equipment to get you up & brewing fast!

We start off with our awesome 10.5 gallon, 42 quart all stainless steel brewing kettle! This great kettle features large stainless looped handles on the side and lid to make moving your brew around a breeze! The kettle also features large stamped markings every 2 gallons to make it easy to identify how much of the good stuff you have brewing at a time.

To ensure you're brewing temperature is set right, we also include one of our heavy duty 12" long stainless steel thermometers. It features an easy to read 1.75" dial with increments every 5° F and numbers every 50° F from 100° to 500°. We've even pre-drilled the kettle lid to accept it's long 12" stem for you!

At the heart of this great brewing combination is a perfectly sized all stainless steel Brew-In-A-Basket (BIAB) filter. Like our standard BIAB filters, it features a 400 micron stainless mesh screen on side and top as well as heavy duty side and bottom supports to give it added strength. Mounted to the bottom are (4) heavy duty feet that keep the filter up off the bottom of the kettle when in use.


Now comes the cool part! To make draining the grain as easy as possible, we've installed small hooks onto the side supports that attach to the included stainless steel support. When you're ready to drain, you simply pull the BIAB up out of the pot, put the included support in place on top of the kettle and set the BIAB hooks in place and the draining can commence! The hooks are installed 5.5" up from the bottom of the filter feet, which leaves just 4 1/2" of the filter sitting down in the kettle for optimal draining. How's that for cool!

In testing, this great combination has worked extremely well and garnered quite a bit of praise for it's ease of use, it's heavy duty construction, and it's easy to clean setup! Grab one today & get your brewing-in-a-basket groove on!

  • FEATURES
  • Brew Kettle Options:Specs:
    • 10.5 gal - 42 Quart Capacity
      - 15 5/8" Diameter x 13 3/4" Tall
      - Stamped Gallon Markings Every 2 Gallons
      - Large Looped Handles For Easy Lifting
      - 304 Stainless Steel Construction
      - Lid is drilled to fit thermometer
    • 15 Gallon - 60 Quart Capacity
      - 15 5/8" Diameter x 19.5" Tall
      - Stamped Gallon Markings Every 2 Gallons
      - Large Looped Handles For Easy Lifting
      - 304 Stainless Steel Construction
      - Lid is drilled to fit thermometer
    • 20 Gallon - 80 Quart Capacity
      - 21" Diameter x 16" Tall
      - Larged Looped Handles For Easy Lifting
      - 304 Stainless Steel Construction
      - Lid is drilled to fit thermometer - Induction Ready
      - 1/4" thick tri-clad bottom
      --- An aluminum core sandwiched between 2 layers of stainless
  • Brew-In-A-Basket Specs:
    - 400 Micron Side & Bottom Stainless Mesh
    - (4) Side Supports With Hooks
    - U-Shaped Draining Support
    - (4) Heavy Duty Feet w/ Rubber Feet Pads
    - 250° F Rated Heavy Duty Rubber Pads
    - 304 Stainless Steel Construction
    - Ideal for Grain Brewing
    - Can Be Used As A Large Dry Hopper
    • BIAB For 10.5 Gal Kettle
      - 14" Diameter x 12.5" Tall
      - (4) 7/8" Heavy Duty Feet w/ Rubber Feet Pads
      - Hooks Set At 5.5" Up From Bottom Of Filter Feet
      - Great for 4-5 Gallon Boil Recipes
      - Ideal for 10 Gallon Extract Brews
    • BIAB For 15 Gal Kettle
      - 14" Diameter x 18" Tall
      - (4) 1" Heavy Duty Feet w/ Rubber Feet Pads
      - Hooks Set At 6" Up From Bottom Of Filter Feet
      - Great For Larger Extract & Boil Recipes
    • BIAB For 20 Gal Kettle
      - 18.5" Diameter x 14" Tall
      - (4) 1" Heavy Duty Feet w/ Rubber Feet Pads
      - Hooks Set A 6" Up From Bottom Of Filter Feet
      - Awesome For Larger Boils & Extract Brews

Proudly built in the USA!

Once we receive your order, the order is sent over to our fabrication shop and work is started on it.
We typically have them built and ready to ship within 2 weeks. Once built, we ship them right to your door! (We can ship these internationally too! Contact us for a ship quote!)

(1) 42 Quart Ultimate Brew In A Basket Combination Package (Continental US)
- Shipping To Non-Western United States (Excludes WA, OR, CA, NV, ID, UT, AZ, NM)
Price: $275.00
Shipping To Continental US: $45.00
(Excludes WA, OR, CA, NV, ID, UT, AZ, NM)
(1) 42 Quart Ultimate Brew In A Basket Combination Package (West Coast)
- Shipping To Western United States (Includes WA, OR, CA, NV, ID, UT, AZ, NM)
Price: $275.00
Shipping To West Coast: $55.00
(Includes WA, OR, CA, NV, ID, UT, AZ, NM)

15 gallon Brew In A Basket Kettle Combo
(1) 60 Quart Ultimate Brew In A Basket Combination Package
15 5/8" x 19.5" Brewing Kettle
+ BIAB 18.5" x 15" w/ 1" Feet, Drain Hooks 6" Up From Bottom of Feet & Drain Support
+ Thermometer
Price: $350.00
Shipping: Contact Us for a ship quote

20 gallon Brew In A Basket Kettle Combo
(1) 80 Quart Ultimate Brew In A Basket Combination Package
21" x 16" Heavy Duty Tri-clad kettle
+ BIAB: 18.5" x 14" w/ 1" Feet, Drain Hooks 6" Up From Bottom of Feet & Drain Support
+ Thermometer
Price: $675.00
Shipping: Contact Us for a ship quote

DRY HOPPERS

7", 11.5", 15", 18", 21", 30", & 36" Tall 300/400 Micron Stainless Corny Keg Dry Hop Filter
BACK TO TOP
corny keg filters for dry hopping beer in cornelius kegs 2.625 x 11.5 inch 300 micron cold brew coffee filter2.625 x 11.5 inch 300 micron corny keg dry hopper beer filter

Description:
This dry hop filter is ideal for use in cornelius "corny" kegs! The 2" tall threaded top screws off to let you add anything you'd like inside the hopper. Once closed back up, you can lower it into your corny keg through the hook on the top. This makes it great for adding dry hops or any other ingredient you'd like to include in your brew! Each filter has a perforated stainless metal top with a filter screen welded into the top as well to contain the hops. The tops easily screw on and off for easy access to the inside. The filters are available in 300 and 400 micron.

Micron Recommendation:
300 Micron - Best for pellet hops
400 Micron - Best for whole leaf hops

Hops Recommendations:
When using to dry hop with pellet hops, we recommend filling the filter up no more than half way.

In our experience, this works out to:
7" - up to 6 ounces
11.5" - up to 10 ounces
15" - up to 12.5 ounces
18" - up to 15 ounces
21" - up to 17.5 ounces

You can certainly put more hops in the container if you choose, but keep in mind that both pellet hops and whole leaf hops will expand. If you were to pack the vessel to the brim, this expansion will likely cause the hops in the center of the vessel to not be in contact with your beer.

Filling up any of our dry hoppers too much will result not only in poor utilization, but also a vessel that is difficult to clean and should probably be soaked if not boiled to remove caked-on hop particles.

The filters also can also be custom ordered in 15, 43, 74, and 100 micron as well (Contact us for details on ordering in a custom micron size). Each filter has a perforated stainless metal top with a filter screen welded into the top as well. The tops easily screw on and off too for easy access to the inside.

These filters have also been extremely popular with coffee brewers. Whether it's infusing flavor into regular brewed coffee or into cold brewed coffee, our customers have found them to be extremely effective! Click Here to see our corny keg filters for coffee brewing

Customer Feedback:
"Outstanding product for dry hoping in kegs. High quality throughout from the twist on cap to the welded seams...... Well designed and well constructed. This product should last a lifetime." - JJ Flash

Proudly built in the USA!
Ships for free within continental United States.
Can be shipped internationally, contact us for a ship quote.

    Specifications
  • 7", 11.5", 15", 18", 21", 30", & 36" Tall
  • 2 5/8" Diameter
  • Threaded Cap & Top Solid Section 430 Stainless Steel
  • 300/400 Micron 304 Stainless Steel
  • Also can be built in 15, 43, 74, & 100 Micron
  • Screw-on lid w/ eyelet at top

NOTE: Check inside height on your corny keg to ensure the corny keg dry hopper your buying will fit

(1) 7" x 2 5/8" Corny Keg Dry Hopper Brewing Filter

Price: $45.00
Free Shipping Within Continental United States
(2 Pack) 7" x 2 5/8" Corny Keg Dry Hopper Brewing Filter

Price: $84.00
Free Shipping Within Continental United States

(1) 11 1/2" x 2 5/8" Corny Keg Dry Hopper Brewing Filter

Price: $48.00
Free Shipping Within Continental United States
(2 Pack) 11 1/2" x 2 5/8" Corny Keg Dry Hopper Brewing Filter

Price: $88.00
Free Shipping Within Continental United States

15", 18", and 21" Corny Keg Dry Hoppers in 300 or 400 micron
(1) 15" x 2 5/8" Corny Keg Dry Hopper Brewing Filter

Price: $60.00
Free Shipping Within Continental United States
(1) 18" x 2 5/8" Corny Keg Dry Hopper Brewing Filter

Price: $72.00
Free Shipping Within Continental United States
(1) 21" x 2 5/8" Corny Keg Dry Hopper Brewing Filter

Price: $84.00
Free Shipping Within Continental United States

30" & 36" Corny Keg Dry Hoppers in 300 or 400 micron
-- great for larger tanks & kettles, may take up to 10 days to ship
(1) 30" x 2 5/8" Corny Keg Dry Hopper Brewing Filter

Price: $126.00
Shipping: $15.00 (Within Continental United States)
(1) 36" x 2 5/8" Corny Keg Dry Hopper Brewing Filter

Price: $156.00
Shipping: $18.00 (Within Continental United States)

Corny Keg Style Cap With 12" Chain - For hanging dry hoppers in corny kegs
Stainless Steel S-hook For Adjusting Chain Length Included

Description:
Check out our awesome Corny Keg Cap and Chain! They're the perfect accessory for your Corny Keg! They fit our Corny Keg Dry Hoppers perfectly allowing you to hang your dry hopper right in the center of your Corny Keg. The caps fit most standard Corny Kegs with oval openings on them.

To make the package as versatile as possible we include a 12" long stainless steel chain and a stainless steel s-hook. This lets you easily adjust the length of the chain to any desired length, which makes it great for use with different sized Corny Kegs and different sized Corny Keg Dry Hoppers.

Also, if you have any other container with a Corny Keg style opening, this cap will fit it.
ie. Blichmann Fermenters, etc.

(1) Corny Keg Style Cap With 12" Chain & S-Hook
Price: $28.00
Free Shipping Within Continental United States
(1) 12" Chain & S-Hook
Price: $10.00
Free Shipping Within Continental United States

1" Diameter x 14" Length Dry Hopper for Glass Carboys | BACK TO TOP
1 inch x 14 Glass Carboy dry hopper
1 inch x 14 Dry Hopper for Glass Carboy dry hopper beer filter
1 inch x 14 Dry Hopper for Glass Carboy dry hopper beer filter

Description:
Brewing in a glass carboy? Then check out this sweet stainless Dry Hopper built just for glass carboys! It's made from 300 micron stainless steel, is 1" diameter and runs 14" long. It comes with 2 silicone plugs to seal up both ends making it extremely simple to load, unload and clean!

You can choose to set the dry hopper all the way in your glass carboy and lean at an angle, or attach a string to one of the silicone plugs and suspend it in your glass brewing carboy. With the plugs installed, the full length runs 15 3/4" long. We also offer extra plugs as well!

    Specifications
  • 1" x 14" - 11 Cubic Inches
  • 300 Micron Stainless Steel
  • Best for pellet hops
    - Not recommended for whole leaf hops
  • (2) Silicone Plugs
  • Recommended Hops - Up To 2 oz
(1) 1" x 14" Dry Hopper for Glass Carboys 300 Micron
Price: $25.00
Free Shipping Within Continental United States
(2 Pack) 1" x 14" Dry Hopper for Glass Carboys 300 Micron
Price: $42.00
Free Shipping Within Continental United States
Replacement Plug For Glass Carboy Dry Hopper
Price: $6.00
Free Shipping Within Continental United States
(Pack of 2) Replacement Plugs For Glass Carboy Dry Hopper
Price: $12.00
Free Shipping Within Continental United States

BETTER BOTTLE STAINLESS DRY HOPPER | BACK TO TOP

Looking to dry hop in a Better Bottle Brewing Carboy? Then we'd like to introduce you to our Better Bottle Stainles Steel Dry Hopper!


It's built to fit perfectly inside most Better Bottles making it an ideal way to dry hop inside these great brewing carboys! The filter is made from 304 300 micron stainless steel, is 1.5" diameter and stands 16" tall. By making it this tall you'll be able to take advantage of the full height of a Better Bottle to dry hop!


To make dry hopping easy with the filter, we even include a #8 drilled white pure gum lab grade 3/8" drilled rubber stopper to seal the top and a completely enclosed mesh bottom made from the same heavy duty stainless steel as the filter side.

To make it versatible, we made it out of 300 micron which means you'll be able to dry hop with either whole leaf or pellet hops! If you're brewing in a Better Bottle, you'll absolutely love how easy these are to use! Pick one up for each of your Better Bottles & get hopping today!

    Specifications
  • 1.5" x 16"
  • 300 Micron - Best for pellet hops
    - Not recommended for whole leaf hops
  • Mesh Side & Bottom
  • #8 3/8" Drilled Lab Grade Rubber Stopper
  • Recommended Hops - Up To 3-4 oz
(1) 1.5" x 16" Dry Hopper for Better Bottle Carboys 300 Micron
Price: $35.00
Free Shipping Within Continental United States
(2 Pack) 1.5" x 16" Dry Hopper for Better Bottle Carboys 300 Micron
Price: $65.00
Free Shipping Within Continental United States
(4 Pack) 1.5" x 16" Dry Hopper for Better Bottle Carboys 300 Micron
Price: $125.00
Free Shipping Within Continental United States
Replacement Plug For Better Bottle Dry Hopper
Price: $6.00
Free Shipping Within Continental United States

AUTO SIPHON FILTER / DIP TUBE FILTER
1 1/8" Diameter x 21" Tall
Auto Siphon Filter
Are you tired of plugging your auto siphon? Looking for a way to keep hops out? Then you'll love our new Auto Siphon Filter! It's available in 1 1/8" (1.125") diameter which means it will fit most carboys and better bottles and can even be used anywhere you need to keep your auto siphon clean! Auto Siphon Filter

The auto siphon filter easily slides over your auto siphon to keep it from getting clogged with hops during transfers. The filter allows you to dry hop loose in the fermenter without having to put the dry hops in a bag, just dump them in! The enclosed filter bottom helps the siphon sit low in the fermenter to keep transfer losses to a minimum too!

Great For Filtering Dip Tubes Too!

Want an easy way to filter through a dip tube? Just add a #6 or #6.5 pre drilled rubber stopper to the top of the auto siphon filter, slide your dip tube down into the filter, install, and enjoy filtering right through your dip tube!

Click Here to see a great write up on using the Auto Siphon Filter on Scott Janish's great beer brewing website! We worked with him to develop the filter!

The filter is made from 300 micron 304 stainless steel and just like our Better Bottle Dry Hopper and Glass Carboy Dry Hopper it can be used multiple times and cleans up really well.

Multiple Uses:
Our auto siphon filter has a multitude of uses!
- Filtering through an auto siphon
- Filtering through an auto siphon discharge tube
- Filtering transfers from primary to secondary
- Filtering secondary to bottling bucket
- Dip Tube Filter for Corny Keg, Sanke, & other kegs - Place it over your diptube for great results!

Adjustable Height
Have an application that's shorter than the filters? Just grab a pair of heavy duty scissors and trim your auto siphon down to fit your needs! A good pair of sewing scissors works great!

Helpful Tips:
- To ensure a proper fit, measure the outside diameter of your auto siphon
   and the inside diameter at the top of the vessel it will be used in.
- Add a #6 to #6.5 pre-drilled rubber stopper to the top of the filter and you can seal it right to a dip tube!

Need a different diameter or length? Contact Us for a quote!

    Auto Siphon Filter Specifications
  • 1.125" (1 1/8") Diameter x 21" Tall
  • 300 Micron (great for keeping pellet hops out!)
  • Mesh Side & Bottom
(1) Auto Siphon Filter 1.125" diameter x 21" tall - 300 Micron
- Great for glass carboys
Price: $35.00
Free Shipping Within Continental United States


BEER FILTER HOUSINGS
HOP RANDALL / HOP BACK FILTER / BEER FILTERING

Stainless & Plastic Hop Back/Hop Randall Filter Housings | BACK TO TOP
Looking for a great way to create a hop back or hop randall? Then check out our great selection of housings! They're available in standard temp plastic (clear), high temp plastic (Red), or heavy duty stainless steel; which can handle both hot and cold liquids.

The housings are a perfect match for our stainless steel cartridge filters too! Each housing features a removable lid with 3/4" female NPT fittings on both sides, an easy to clean filter housing bowl, and each lid even includes pre-drilled holes for mounting the filter housing top to your setup. The stainless model even includes mounting bolts!

The filter cartridges feature seals at both ends and can be custom ordered in a wide range of micron sizes as well. Combined together, they're great for all sorts of uses! For maximum efficiency and surface area, cartridges have a perforated backer designed for flowing liquid through the filter cartridge into the center and then back out of the housing. Pick a set up today!

    Features
  • Approximate Size: 13" Tall x 5" Diameter at top
  • Liquid Flow Is Through Filter Cartridge And Up Through Center
  • Clear Plastic Filter Housing
    • Uses 9 7/8" tall stainless filter Cartridges
    • 3/4" NPT Fittings
    • Buna rubber bowl seal
    • Can handle liquids up to 125° F
    • Can handle up to 125 psi
  • High Temp Plastic Filter Housing
    • Uses 9 7/8" tall stainless filter Cartridges
    • 3/4" NPT Fittings
    • Buna rubber bowl seal
    • Can handle liquids up to 200° F
    • Can handle up to 125 psi
  • Stainless Housing
    • Uses 9 1/2" tall stainless filter Cartridges
    • 3/4" NPT fittings
    • Buna rubber bowl seal
    • Can handle liquids up to 200° F
    • Can handle up to 200 psi
    • Includes (4) mounting bolts & mounting bracket
    • Includes 1/4" drain plug at bottom
    • Stainless Housing Diagram

(1) Clear Plastic Filter Housing (Uses 9 7/8" Stainless Filter Cartridges)
Price: $31.99
Free Shipping Within Continental United States
ADD A STAINLESS FILTER CARTRIDGE
* All micron sizes except 300 micron may take up to 3 weeks to ship *
Contact us for availability
9 7/8" Stainless
Filter Cartridge
149/234/300/400 Micron
Select Micron Rating

Price: $55.99
9 7/8" Stainless
Filter Cartridge
74/100/120/177 Micron
Select Micron Rating

Price: $62.99
9 7/8" Stainless
Filter Cartridge
25/43 Micron
Select Micron Rating

Price: $88.99
9 7/8" Stainless
Filter Cartridge
15 Micron
Price: $105.99
9 7/8" Stainless
Filter Cartridge
10 Micron
Price: $93.99
9 7/8" Stainless
Filter Cartridge
5 Micron

Price: $193.99

(1) High Temp Plastic Filter Housing (Uses 9 7/8" Stainless Filter Cartridges)
Price: $63.99
Free Shipping Within Continental United States
ADD A STAINLESS FILTER CARTRIDGE
* All micron sizes except 300 micron may take up to 3 weeks to ship *
Contact us for availability
9 7/8" Stainless
Filter Cartridge
149/234/300/400 Micron
Select Micron Rating

Price: $55.99
9 7/8" Stainless
Filter Cartridge
74/100/120/177 Micron
Select Micron Rating

Price: $62.99
9 7/8" Stainless
Filter Cartridge
25/43 Micron
Select Micron Rating

Price: $88.99
9 7/8" Stainless
Filter Cartridge
15 Micron
Price: $105.99
9 7/8" Stainless
Filter Cartridge
10 Micron
Price: $93.99
9 7/8" Stainless
Filter Cartridge
5 Micron

Price: $193.99

(1) Stainless Steel Filter Housing (Uses 9 1/2" Stainless Filter Cartridges)
Price: $155.99
Free Shipping Within Continental United States
ADD A STAINLESS FILTER CARTRIDGE
* All micron sizes except 300 micron may take up to 3 weeks to ship *
Contact us for availability
9 1/2" Stainless
Filter Cartridge
149/234/300/400 Micron
Select Micron Rating

Price: $55.99
9 1/2" Stainless
Filter Cartridge
74/100/120/177 Micron
Select Micron Rating

Price: $62.99
9 1/2" Stainless
Filter Cartridge
25/43 Micron
Select Micron Rating

Price: $88.99
9 1/2" Stainless
Filter Cartridge
15 Micron
Price: $105.99
9 1/2" Stainless
Filter Cartridge
10 Micron
Price: $93.99
9 1/2" Stainless
Filter Cartridge
5 Micron

Price: $193.99

BEER FILTER HOUSING CARTRIDGES
HOP RANDALL / HOP BACK / BEER FILTING

2.5" Diameter x 9 1/2", 9 3/4", 9 7/8", & 10" Tall - Hop Back/Hop Randall Filter | BACK TO TOP


These filters can be used with a standard beer filter housing to create a hop randall or a hop back filter. They're available in a variety of different sizes to fit your exact housing and feature a heavy duty BUNA-N rubber gasket. They come in 300 micron and are completely stainless steel throughout making them ideal for use in beer filtration housings. To give the filter extra strength, the 300 micron mesh is backed with heavy duty perforated stainless steel. Yep! They're tough!

For maximum efficency and surface area, they're designed to flow liquid through the filter to the center and then back out through the housing.

Be sure and measure your filter element prior to purchase to ensure you get the right filter for your housing.

    Specifications:
  • 2.5" Diameter
  • 9 1/2", 9 3/4", 9 7/8", & 10" Lengths
  • 300 Micron Stainless Steel
  • Heavy Duty BUNA-N Gasket
  • All Stainless Steel Construction

Proudly made in the USA!

2.5" Diameter 300 Micron Stainless Filter For Beer Filter Housings
Length:
Price: $55.99 Free Shipping Within Continental United States

INLINE FILTERS



Need an easy way to do inline filtering? Then check out our inline filter! It's built using 2" tri-clover fittings which makes it easy to use, easy to clean, and easily modified to fit your needs!

It's such a cool filter that it has a page all it's own!
Click Here to learn all about it!


KETTLE SCREENS

12" x 1/2" NPT Brewing Kettle Screen (similar to a Bazooka Screen) | BACK TO TOP
12 inch x 1/2 NPT Bazooka Kettle Screen beer filter

Description:
This all stainless kettle brewing screen is also made from heavy duty 800 micron 304 stainless steel. It can also be used for straining hops in a boil or for use in mash tun instead of using a false bottom. It's 12" long from fitting to end of filter and features a 1/2" NPT fitting at the top and a crimped and welded bottom. It's very similar to a Bazooka Screen and works great for brewing!

12" Brewing (Bazooka) Kettle Screen 800 Micron
Price: $13.00
Free Shipping Within Continental United States

SPEIDEL BRAUMEISTER FILTERS

6" x 12" 300 Micron For 20 Liter Speidel Braumeister | BACK TO TOP
Speidel Braumeister FilterSpeidel Braumeister Filter Speidel Braumeister Filter

This stainless steel brewing filter is designed to fit inside a 20 liter Speidel Braumeister brewing unit. Made from our heavy duty 304 stainless steel, the filter features a 300 micron side and bottom mesh material and has a 1/2" stainless steel hollow rod extending the full length of the filter and down through the bottom an extra 2" inches. This allows the filter to easily slip onto the rod inside a 20 liter Speidel Braumeister unit and with the 2" extention on the bottom it keeps the filter up off of the heating element and temperature wells.

The filter itself stands 12" tall (14" with the bottom rod extension) and is 6" diameter making it a perfect fit for the 20 liter Speidels Braumeister unit.

The construction is all 304 stainless steel with heavy duty welds attaching all of the components. Like our other great filters you'll love it the moment you take it out of the box & will thoroughly enjoy how much easier it makes brewing in your Braumeister. The unit is produced in the United States and can be shipped internationally (contact us for international ship quotes).

6" x 12" 300 Micron Stainless Steel Filter For 20 Liter Speidel Braumeister
Price: $90.00
Free Shipping Within Continental United States

10.5" x 16" 300 Micron For 50 Liter Speidel Braumeister | BACK TO TOP
50 Liter Speidel Braumeister Filter50 liter 300 micron Speidel Braumeister Filter 50 Liter Speidel Braumeister Filter 50 Liter Speidel Braumeister Filter

This stainless steel brewing filter is designed to fit inside a 50 liter Speidel Braumeister brewing unit. Made from our heavy duty 304 stainless steel, the filter features a 300 micron side and bottom mesh material and has a 1/2" stainless steel hollow rod extending the full length of the filter and down through the bottom an extra 2" inches. This allows the filter to easily slip onto the rod inside a 50 liter Speidel Braumeister unit and with the removable 2" extension on the bottom it keeps the filter up off of the heating element and temperature wells.

The filter itself stands 16" tall (18" with the bottom rod extension) and is 10.5" diameter making it a perfect fit for the 50 liter Speidels Braumeister unit.

Like our 20 liter Speidel filter, the construction is all 304 stainless steel with heavy duty welds attaching all of the components. We also add two support bars at the top to ensure the tube has extra stability. Like all of our other great stainless steel filters you'll love it the moment you take it out of the box & will thoroughly enjoy how much easier it makes brewing in your Braumeister. The unit is produced in the United States and can be shipped internationally (contact us for international ship quotes).


10.5" x 16" 300 Micron Stainless Steel Filter For 50 Liter Speidel Braumeister
- Shipping To Non-Western United States (Excludes WA, OR, CA, NV, ID, UT, AZ, NM)
Price: $155.00 (May take up to 5 days to ship)
Shipping To Non Western United States
10.5" x 16" 300 Micron Stainless Steel Filter For 50 Liter Speidel Braumeister
- Shipping To Western United States (Includes WA, OR, CA, NV, ID, UT, AZ, NM)
Price: $165.00 (May take up to 5 days to ship)
Shipping To West Coast United States

WINE FILTERS

14" & 22" long x 1 3/4" 800 Micron Wine Barrel Filter


This is available in 14" & 22" long by 1 3/4" diameter 800 micron filter for use with sanitary barrels. The flange at the top measures 2.25" without the sanitary gasket and 2.5" with the gasket installed. It can be attached to a wine barrel with a standard 2" tri-clover sanitary fitting. The filter includes the stainless filter and sanitary gasket. The tri-clover fitting and bung adaptor are not included.

(1) 14" x 1 3/4" 800 Micron Wine Barrel Filter With Sanitary Gasket
- Filter & Gasket Only, Tri-clover fitting not included
Price: $50.00
Free Shipping Within Continental United States
(1) 22" x 1 3/4" 800 Micron Wine Barrel Filter With Sanitary Gasket
- Filter & Gasket Only, Tri-clover fitting not included
Price: $50.00
Free Shipping Within Continental United States
4"x10" 300/400
Side Hanging
+ Corny Keg 300

Select 4x10 Micron

Price: $83.50
6"x10" 300/400
Side Hanging
+ Corny Keg 300

Select 6x10 Micron

Price: $99
6"x11" 300/400
Side Hanging
+ Corny Keg 300

Select 6x11 Micron

Price: $101
6"x12" 300/400
Side Hanging
+ Corny Keg 300

Select 6x12 Micron

Price: $106
6"x14" 300/400
Side Hanging
+ Corny Keg 300

Select 6x14 Micron

Price: $116
6"x14" Keggle
Center Hanging
+ Corny Keg 300

Select 6x14 Micron

Price: $121
6"x14" Keggle
Outside Hook
+ Corny Keg 300

Select 6x14 Micron

Price: $121
6"x16" 300/400
Side Hanging
+ Corny Keg 300

Select 6x16 Micron

Price: $131
6"x19" 300/400
Side Hanging
+ Corny Keg 300

Select 6x19 Micron

Price: $136
8"x14" 300/400
Side Hanging
+ Corny Keg 300

Select 8x14 Micron

Price: $126
8"x16" 300/400
Side Hanging
+ Corny Keg 300

Select 8x16 Micron

Price: $136
10.5" Combo Packs
Shipping To Non-Western United States
(Excludes WA, OR, CA, NV, ID, UT, AZ, NM)

10.5"x14" 300/400
Side Hanging
+ Corny Keg 300

Select
10.5x14 Micron

Price: $161
10.5"x16" 300/400
Side Hanging
+ Corny Keg 300

Select
10.5x16 Micron

Price: $171
10.5" Combo Packs
Shipping To Western United States
(Includes WA, OR, CA, NV, ID, UT, AZ, NM)

10.5"x14" 300/400
Side Hanging
+ Corny Keg 300

Select
10.5x14 Micron

Price: $171
10.5"x16" 300/400
Side Hanging
+ Corny Keg 300

Select
10.5x16 Micron

Price: $181
4"x10" 300/400
Side Hanging
+ (2) Corny Keg 300

Select 4x10 Micron

Price: $124.50
6"x10" 300/400
Side Hanging
+ (2) Corny Keg 300

Select 6x10 Micron

Price: $140
6"x11" 300/400
Side Hanging
+ (2) Corny Keg 300

Select 6x11 Micron

Price: $142
6"x12" 300/400
Side Hanging
+ (2) Corny Keg 300

Select 6x12 Micron

Price: $147
6"x14" 300/400
Side Hanging
+ (2) Corny Keg 300

Select 6x14 Micron

Price: $157
6"x14" Keggle
Center Hanging
+ (2) Corny Keg 300

Select 6x14 Micron

Price: $162
6"x14" Keggle
Outside Hook
+ (2) Corny Keg 300

Select 6x14 Micron

Price: $167
6"x16" 300/400
Side Hanging
+ (2) Corny Keg 300

Select 6x16 Micron

Price: $172
6"x19" 300/400
Side Hanging
+ (2) Corny Keg 300

Select 6x19 Micron

Price: $177
8"x14" 300/400
Side Hanging
+ (2) Corny Keg 300

Select 8x14 Micron

Price: $167
8"x16" 300/400
Side Hanging
+ (2) Corny Keg 300

Select 8x16 Micron

Price: $177
10.5" Combo Packs
Shipping To Non-Western United States
(Excludes WA, OR, CA, NV, ID, UT, AZ, NM)

10.5"x14" 300/400
Side Hanging
+ (2) Corny Keg 300

Select
10.5x14 Micron

Price: $202
10.5"x16" 300/400
Side Hanging
+ (2) Corny Keg 300

Select
10.5x16 Micron

Price: $212
10.5" Combo Packs
Shipping To Western United States
(Includes WA, OR, CA, NV, ID, UT, AZ, NM)

10.5"x14" 300/400
Side Hanging
+ (2) Corny Keg 300

Select
10.5x14 Micron

Price: $212
10.5"x16" 300/400
Side Hanging
+ (2) Corny Keg 300

Select
10.5x16 Micron

Price: $222
4"x10" 300/400
Side Hanging
+ Glass Carboy
Dry Hoppper

Select 4x10 Micron

Price: $61.50
6"x10" 300/400
Side Hanging
+ Glass Carboy
Dry Hoppper

Select 6x10 Micron

Price: $77
6"x11" 300/400
Side Hanging
+ Glass Carboy
Dry Hoppper

Select 6x11 Micron

Price: $79
6"x12" 300/400
Side Hanging
+ Glass Carboy
Dry Hoppper

Select 6x12 Micron

Price: $84
6"x14" 300/400
Side Hanging
+ Glass Carboy
Dry Hoppper

Select 6x14 Micron

Price: $94
6"x14" Keggle
Center Hanging
+ Glass Carboy
Dry Hoppper

Select 6x14 Micron

Price: $99
6"x14" Keggle
Outside Hook
+ Glass Carboy
Dry Hoppper

Select 6x14 Micron

Price: $104
6"x16" 300/400
Side Hanging
+ Glass Carboy
Dry Hoppper

Select 6x16 Micron

Price: $109
6"x19" 300/400
Side Hanging
+ Glass Carboy
Dry Hoppper

Select 6x19 Micron

Price: $114
8"x14" 300/400
Side Hanging
+ Glass Carboy
Dry Hoppper

Select 8x14 Micron

Price: $104
8"x16" 300/400
Side Hanging
+ Glass Carboy
Dry Hoppper

Select 8x16 Micron

Price: $114
10.5" Combo Packs
Shipping To Non-Western United States
(Excludes WA, OR, CA, NV, ID, UT, AZ, NM)

10.5"x14" 300/400
Side Hanging
+ Glass Carboy
Dry Hoppper

Select
10.5x14 Micron

Price: $139
10.5"x16" 300/400
Side Hanging
+ Glass Carboy
Dry Hoppper

Select
10.5x16 Micron

Price: $149
10.5" Combo Packs
Shipping To Western United States
(Includes WA, OR, CA, NV, ID, UT, AZ, NM)

10.5"x14" 300/400
Side Hanging
+ Glass Carboy
Dry Hoppper

Select
10.5x14 Micron

Price: $149
10.5"x16" 300/400
Side Hanging
+ Glass Carboy
Dry Hoppper

Select
10.5x16 Micron

Price: $159
To purchase any of the filters below, Contact Us via email or phone.
Be sure to include your full ship to address so we can calculate shipping as well.

B10 - 12" Diameter x 8.5" Tall - 1/8" Mesh
Damage: None
Price: $60 + shipping

B20 - 11.5" Diameter x 7.5" Tall - 1/8" Mesh
Damage: Crooked Bottom
Price: $54 + shipping


B23 - 16 7/8" Diameter x 7 5/8" Tall - 1000 Micron
With Bar Across Opening - With Side Supports
Damage: None
Price: $90 + shipping


B34 6" diameter x 12" tall - 300 micron
- with 1/2" ID washer welded to the filter with a hole through bottom
- similar to our Speidel filter but without the tube
Damage: wrinkled mesh
Price:$66 + shipping


B36 4" diameter x 6" tall - 300 micron - with flange at top out to 5.5"
Damage: none
Price:$60 + shipping


C3 13.75" Diameter x 18" Tall - 74 micron
Damage: Mesh wrinkled
Price: $120 + shipping
+ $24 to add side supports


C5 16" Diameter x 12" Tall - 1000 Micron
Damage: None
Price: $96 + shipping


C10 6" diameter x 12" Tall - 300 micron - Spiedel trim
Damage: Bad weld at washer. Not burned through, weld just looks ugly
Price: $78 + shipping


C12 7" Diameter x 35" Tall - 15 Micron
Damage: wrinkled mesh
Price: $180 + shipping


C14 8" Diameter x 14" Tall - 300 micron - 2" drop hooks
- Drop hook width approx. 3/8" to 1/2" wide
Damage: wrinkled mesh
Price: $72 + shipping


C15 10.5" Diameter x 16" Tall - 300 micron - Speidel washer welded into bottom
- will finish into a full 50 liter spiedel filter prior to shipping
Damage: wrinkled mesh
Price: $120 + shipping


C17 6" Diameter x 16" Tall - 400 micron - Speidel washer welded into bottom
- will finish into a full spiedel style filter prior to shipping
Damage: wrinkled mesh
Price: $90 + shipping


C19 6" Diameter x 12" Tall - 300 micron - Speidel washer welded into bottom
- will finish into a full spiedel style filter prior to shipping
Damage: wrinkled mesh
Price: $60 + shipping


C21 18" Diameter x 16" Tall - 400 micron - holes drilled for swing handle
Damage: bottom is out of round at 17 5/8"
Price: $180 + shipping

- Can add a swing handle to filter for $24 additional


F6 - 11" Diameter x 13" Tall - 400 micron
Damage/Issues: Hole in bottom
Price: $96 + shipping


F9 10.5" Diameter x 16" Tall - 800 micron - with side supports
Damage/Issues: Burn hole at top ring
Price: $96 + shipping


F15 8" Diamter x 16" Tall - 300 micron 1" outside hooks
Damage/Issues: No damage
Price: $102 + shipping


F18 9" Diameter x 5" Tall - 177 Micron
Damage/Issues: Crushed/wrinkled mesh
Price: $24 + shipping


F19 13" Diameter x 13.5" Tall - 800 with double 1" top ring - with 3/4 cross brace
Damage/Issues: Hole in the bottom
Price: Contact us for price


G1 10" Diameter x 12" Tall - 74 micron
Damage/Issues: Wrinkled mesh
Price: $120 + shipping


G5 10.5" Diameter x 16" Tall - 300 micron
Damage/Issues: Wrinkled mesh
Price: $108 + shipping


G6 6" Diameter x 14" Tall - 300 micron - tapered at bottom
Damage/Issues: None
Price: $48 + shipping


G7 6" Diameter x 15" Tall - 300 micron - drop hooks (2" tall x 5.5" wide x 1" hook)
Damage/Issues: Wrinkled mesh
Price: $90 + shipping


G8 6" Diameter x 12" Tall - 300 micron - straight side hooks, spiedel style washer and hole in bottom
- Filter will be finished into a full Spiedel Style filter before it ships
- Hooks at the top can also be removed prior to shipping if you desire.
- If hooks removed, top will show signs of where hooks were
Damage/Issues: None, but has Speidel style 1/2" hole in bottom
Price: $66 + shipping


G10 12" Diameter x 5.25" Tall - 1/4" Mesh
Damage/Issues: sides 1/8" not true
Price: $54 + shipping


G11 10" Diameter x 5.5" Tall - 1/4" Mesh
Damage/Issues: no damage
Price: $30 + shipping


G12 9.75" Diameter x 4" Tall - 43 micron w/ 1000 micron backer
Damage/Issues: no damage
Price: $132 + shipping


G13 4" Diameter x 10" Tall - 300 micron
Damage/Issues: wrinkled mesh
Price: $24 + shipping



G14 13" Diameter x 12.5" Tall - 300 micron - with side supports
Damage/Issues: tiny burn hole in bottom
Price: $120 + shipping


G16 6" Diameter x 12" Tall - 300 micron - with Speidel style hole with washer in bottom
Damage/Issues: wrinkled mesh
Price: $24 + shipping


G17 6" Diameter x 12" Tall - 300 micron - with Speidel style hole with washer in bottom
Damage/Issues: wrinkled mesh
Price: $24 + shipping


G18 6" Diameter x 12" Tall - 300 micron - with Speidel style hole with washer in bottom
Damage/Issues: wrinkled mesh
Price: $24 + shipping


G28 12" Diameter x 13" Tall - 400 micron - 3" feet (no feet pads)
Damage/Issues: tear in side 3" from top (will be patched before being shipped)
Price: $90 + shipping


G30 10.5" Diameter x 16" Tall - 300 micron
Damage/Issues: hole in bottom
Price: $84 + shipping


G31 8" Diameter x 14" Tall - 300 micron - with washer and hole in bottom (Spiedel style)
Damage/Issues: wrinkled mesh
Price: $48 + shipping


G32 4" Diameter x 24" Tall - 300 micron - with side supports
Damage/Issues: none
Price: $90 + shipping


G33 4" Diameter x 24" Tall - 300 micron - with side supports
Damage/Issues: none
Price: $90 + shipping


H1 10" Diameter x 13.75" Tall - 74 micron - top ring on outside
Damage/Issues: none
Price: $120 + shipping
- Can add a swing handle to filter for additional $12


H2 10" Diameter x 13.75" Tall - 74 micron - top ring on outside
Damage/Issues: none
Price: $120 + shipping
- Can add a swing handle to filter for additional $12


H3 10" Diameter x 13.75" Tall - 74 micron - top ring on outside
Damage/Issues: none
Price: $120 + shipping
- Can add a swing handle to filter for additional $12


WB1 1 7/8" Diameter x 22" long - 800 micron "wine barrel" style filter
Damage/Issues: wrinkled mesh
Price: $30 + shipping


CUSTOM BREWING FILTERS


Don't see what you need? Let us build it for you! If you can explain it, we can probably built it! We have a full custom shop ready to build any filter you might need! You'll love our quality craftsmanship, our professionalism, and our speed in getting you just the right filter!

Our custom filters generally take about 7-14 days to build and can ship right to your door!

Click Here to see just a sampling of some of the awesome custom filters we've built!

Want a quote on a custom filter? Contact us today!


HOW THE FILTERS ARE BUILT

How We Build Our Brewing Filters | BACK TO TOP
We start off using high quality 304 stainless steel mesh for the sides and bottom. Then the stainless rings are fabricated. We then weld the screen mesh all the way around the bottom ring and seam weld the stainless side into a single piece.

Next, the top and bottom rings are attached and then the supports are welded on creating a heavy duty stainless steel filter that's now complete and ready to use!

The filters are then packed with care and shipped direct to you to enjoy!


MGBJ Enterprises, LLC - 801-820-5753 - © Copyright 2005-2017 - All Rights Reserved - NX NEW